AFBufferOption |
Updating data reference values with or without buffer. |
4161 |
AFUpdateOption |
Indicates how to treat duplicate values in the archive, when supported by the Data Reference. |
4160 |
AGL |
List of Active Directory or local groups (semicolon separated) defining access rights to the object. Only applies if object level security is enabled and the site is secured. |
2165 |
APRMMaxCount |
The maximum number of batches which are fetched from APRM in a single call. |
12066 |
AbsoluteDateTimeEnd |
Absolute Datetime end container. |
2138 |
AbsoluteDateTimeStart |
Absolute Datetime start container. |
2137 |
AccessControlHolder |
OPC-compliant access rights for general read/write enabling with respect to external clients (does not replace Security). |
413 |
AccessRights |
Server side defined access rights. |
386 |
AccessTokenLifeTime |
The period in seconds an access token remains valid after being issued. The client application is expected to refresh or acquire a new access token after the token has expired. |
2824 |
AccessTokenSecret |
A base64 signing key used to sign a token. |
2822 |
AccountName |
The users' account name recognized by the authentication provider. |
275 |
AcquisitionChainStatus |
Table that contains the broken down data acquisition objects for all history transfer controllers in the system. |
5327 |
AcquisitionFrame |
Specify the number of days a single fetch shall retrieve from the external system. Increase this value with care to not overload the external system. |
6583 |
AcquisitionMode |
The acquisition mode defines how the value for this tag will be fetched. |
3016 |
AcquisitionOptions |
Specifies various options how data is retrieved from the external system. |
6585 |
ActionDropzone |
Compound that contains the properties of the File Monitor Action for type Dropzone. |
6484 |
ActionEvent |
Compound that contains the properties of the File Monitor Action for type Event. |
6486 |
ActionModel |
Compound that contains the properties of the File Monitor Action for type Model. |
6487 |
ActionName |
The name of the action which will be performed on the file. |
6493 |
ActionScript |
Compound that contains the properties of the File Monitor Action for type Script. |
6485 |
ActionTable |
Compound that contains the properties of the File Monitor Action for type Table. |
6488 |
ActionType |
The type of action which will be performed on the file. |
6495 |
ActivationMode |
Controls the activation mode of the object Action Item. |
2874 |
Activations |
Number of total activations. |
2712 |
ActiveBatches |
This table shows the data of the active batches. |
3031 |
ActiveSubscriptionDelay |
The current countdown timer of a delayed subscription. |
1804 |
ActivityMonitoring |
Monitoring of the vital signs of the object. |
567 |
AdditionalTableName |
The fully qualified additional table to insert additional product records for production. |
3068 |
AdfsApplicationID |
The URI that identifies the inmation Web API in the ADFS. |
11904 |
AdfsCallback |
The URL to be used by the ADFS to redirect back to the inmation Web API after a successful login. |
11905 |
AdfsMetadataAddress |
The endpoint at which the ADFS publishes its metadata. |
11906 |
AdfsStateText |
The state of the Web API - ADFS integration. |
11908 |
AdministrativeGroup |
Check this if the users role shall be used for administrative access. If a Role does not have this option checked it is not possible to allow assigned users or groups administrative rights for objects in the system. |
271 |
AdvTrendTheme |
Theme settings. |
12008 |
AdvancedConfiguration |
Kafka Producer's advanced configuration options. |
6704 |
AdvancedLuaScript |
Script editor to enter an advanced Lua script. |
543 |
AeFilterEventType |
A&E event type filters as defined by the OPC standard. |
643 |
AeFilterOption |
When switched on, this option allows you to collect only a subset of the A&E data from the server to which the event stream object is connected. Please be aware that the support for server-side filtering varies heavily from vendor to vendor and system to system. |
642 |
AeForwardedEvents |
Current number of events forwarded by the event stream, which equals the number of events which have been considered non-redundant. |
844 |
AeRawHistory |
This setting defines whether a certain Event Stream shall historize raw events. |
842 |
AeRedActiveConnectorName |
Current active connector name for redundant event filtering. |
711 |
AeRedActiveDataSourceName |
Current active datasource name for redundant event filtering. |
717 |
AeRedActiveRefName |
Current active reference name for redundant event filtering. |
710 |
AeRedActiveStreamName |
Current active stream name for redundant event filtering. |
712 |
AeRedActiveTime |
Current active timestamp for redundant event filtering. |
713 |
AeRedBufferMaxHash |
The absolute maximum of hashes to keep in memory. |
846 |
AeRedBufferSettings |
Adjustments of the working buffer size. |
843 |
AeRedBufferTimePeriod |
The maximum time period to keep hashed events in memory. |
845 |
AeRedEventsProcessed |
Current number of events processed by the redundant event stream. |
716 |
AeRedundancyInfo |
The current information about event selection in the redundant event stream. |
714 |
AeSevFilterHigh |
This is the upper bound of A&E severities which shall be acquired by the stream object. According to the OPC specification values between 1 and 1000 are valid event severities. The given value is inclusive. |
705 |
AeSevFilterLow |
This is the lower bound of A&E severities which shall be acquired by the stream object. According to the OPC specification values between 1 and 1000 are valid event severities. The given value is inclusive. |
704 |
AggregateSelection |
The default aggregate to be used for the web displays. |
918 |
AggregateSelectionX |
The aggregate to be used for the pen X in the web displays. |
2200 |
AggregateSelectionY |
The aggregate to be used for the pen Y in the web displays. |
2199 |
AggregationOptions |
Aggregation Options. |
4142 |
AlarmGenDigitalMode |
The mode for digital alarm generation. |
1914 |
AlarmGenerationType |
Selection of the type of alarm generation. |
1913 |
AlarmMessage |
The user configured message for a particular alarm. |
1920 |
AlarmSeverity |
The user configured severity for a particular alarm, according the OPC Standard (1-200=LOW, 201-400=MEDIUM LOW, 401-600=MEDIUM, 601-800=MEDIUM HIGH, 801-1000=HIGH). |
1921 |
AliasName |
The pseudo name to extent the batch header or unit fields. |
3021 |
AllocateTimeout |
Specifies the timeout to allocate a connection to the core to process a request. |
2819 |
AllowAnonymousClientAccess |
Indicates anonymous clients are allowed to request an access token. |
2828 |
AllowLogging |
Allow the item to log information. |
2503 |
AlternativeInterface |
Allows to select an alternative interface for the history transporter. |
2788 |
AlternativeInterfaceParameter |
Compound to define an alternative interface. |
2793 |
Altitude |
The height above sea level of the location. |
46 |
AnalyzerScheduling |
Compound to define the schedule options. |
3003 |
AnalyzerStateManagement |
Maintains the state of the SchedulerItem. |
3002 |
AnnotationsPermitted |
Users may add annotations to the Batch Production Record. |
6740 |
ApiVersionFallbackMs |
Dictates how long the fallback is used in the case the ApiVersionRequest fails. NOTE: The ApiVersionRequest is only issued when a new connection to the broker is made (such as after an upgrade). |
6649 |
ApiVersionRequest |
Request broker's supported API versions to adjust functionality to available protocol features. |
6647 |
ApiVersionRequestTimeoutMs |
Timeout for broker API version requests. |
6648 |
ApplicableEventTypes |
The option group for applicable OPC event types. |
656 |
ApplyFlag |
|
12139 |
ArchiveOptions |
Selection between different archive options. |
421 |
ArchiveSelector |
Select default Production Archive or Test Archive of the master core or a custom set of data stores. |
419 |
Area |
Allows to define the area hierarchy, separated by slashes, the data belongs to. Example: "Area51/Subarea1". |
4121 |
AssemblyRelationship |
Compound to define the type of relationships. |
737 |
AssemblyRelationshipEnum |
Identifies the type of a relationship between assemblies definition. This may be either a standard type or an application specific extended type. Standard enumerations are: "Permanent", "Transient", and "Other". |
736 |
AssemblyType |
Compound to define the type of the assembly. |
733 |
AssemblyTypeEnum |
Defines the type of assembly i.e. if components are physical connected or not. |
734 |
Asset |
Allows to define the asset name the data belongs to. |
4123 |
AssetCode |
The code which is used to identify the asset in the ERP system. |
2997 |
AssetEffectivenessStaging |
Compound for asset effectiveness staging. |
2988 |
AssetHierarchyOptions |
Definition of the asset hierarchy. |
4138 |
AttributeAmplification |
Creates the given number of artificial attributes for each real attribute which was recorded from the source. Do not use this option for productive systems. |
1199 |
AttributeDataType |
The event attribute data type. |
727 |
Audience |
Identifies the recipients (inmation Web API's) that a JSON Web Token (JWT) is intended for. |
2826 |
AuditTrail |
Audit Trail Settings. |
6443 |
AuditTrailDatabase |
The name of the database where audit trail is stored. |
6441 |
AuditTrailEnable |
Enable the audit trail functionality. |
6442 |
AuditTrailKey |
The key to compute the HMAC of audit trail documents. |
11914 |
AuditTrailManagement |
Properties for managing Audit Trail. |
11986 |
AuditTrailRole |
The roles a user has in managing and viewing Audit Trail. |
11984 |
AuditTrailStrategy |
Types of actions that should be audited. |
11797 |
AuthDomain |
The Authenticating Domain instance this account belongs to. |
276 |
AuthenticationProtocol |
The Authentication Protocol (NTLM,BASIC,DIGEST,…). |
617 |
AutoAcknowledge |
If this flag is set, alarms of a particular generator source are automatically acknowledged. |
1940 |
AuxStateChangeStrategy |
Specifies how auxiliary state changes are handled. |
1571 |
AuxStateManagement |
Configurable settings for auxiliary state management. |
1569 |
Available |
The feature is available. |
693 |
AvailableInterfaces |
Available Interfaces. |
509 |
AxisEndTime |
The end time must be after start time, and the value can be an actual or relative date [e.g., 6/12/2019 or *-7Days]. |
11989 |
AxisGrid |
Show grid lines. |
12031 |
AxisLocked |
Lock the axis. |
12006 |
AxisPosition |
Compound for the axis position properties. |
11999 |
AxisPositionAlignment |
Alignment of the axis (Y: "left" or "right", X: "top" or "bottom"). |
12001 |
AxisPositionEnd |
End of axis along its direction in percent. |
12005 |
AxisPositionOrientation |
Label orientation of the axis. |
12007 |
AxisPositionStart |
Start of axis along its direction in percent. |
12004 |
AxisPositionValue |
Order of the axis position. |
12003 |
AxisStartTime |
The start time must be before end time, and the value can be an actual or relative date [e.g., 6/12/2019 or *-7Days]. |
11988 |
B2MMLDataType |
Defines the target data type according to the B2MML definition. |
5251 |
BPRPublishError |
Publish errors related to Batch Production Record changes or insertions. |
6745 |
BPRPublishSuccess |
Publish successful changes to or insertions of Batch Production Records. |
6744 |
BPRPublishTransientError |
Publish transient errors related to Batch Production Record changes or insertions. |
6746 |
BPRPublishingOptions |
Compound that controls what type of Batch Production Record events will be published. |
6743 |
Bandwidth |
OPC Server specific information. A suggested use is that it returns the approximate percent of bandwidth currently in use by the server. If multiple links are in use it could return the 'worst case' link. |
555 |
BaseAddress |
The base address of Uniform Resource Identifier (URI). |
2812 |
BasketCalls |
The object will group certain tag calls according to their proximity in respect to the required time frame. |
6586 |
BasketLimit |
Specifies the limit for basket calls. |
6587 |
BatchActiveOptions |
Compound to manage the batch active state. |
5223 |
BatchActiveScript |
The Lua script function which can be used to determine the batch active state. Please note that the custom script has access to the entire batch data record and needs to return a boolean (true or false). A return of 'nil' or any other value type has no effect. |
5226 |
BatchApplicationMode |
Selection of the batch application mode. |
5279 |
BatchArea |
The name of the batch area as it is defined in AspenTech's APRM configuration. |
2961 |
BatchCharacteristics |
Compound for batch characteristics parameter. |
5241 |
BatchCurrent |
JSON document for the current batch. |
5228 |
BatchCurrentTimestamp |
The time when the current batch recently was updated. |
5247 |
BatchData |
Compound for batch data. |
5262 |
BatchDatasource |
The name of the batch data source as it is defined in AspenTech's APRM configuration. |
2962 |
BatchEventGroups |
Array compound for batch event data. |
5266 |
BatchFieldConfiguration |
Compound for the field configuration for batch records. |
2964 |
BatchInterface |
Selection of the batch interface. |
2987 |
BatchMLProductionRecordElement |
Defines the The Batch Production Record Element the batch data will be assigned to. |
5255 |
BatchMLProductionRecordElements |
Defines the sub-record the batch data will be assigned to. |
5250 |
BatchMLSettings |
Settings to exchange information about S88 batch production records. |
5249 |
BatchNumMessages |
Maximum number of messages batched in one MessageSet. |
6691 |
BatchODBCConnection |
ODBC connection parameters for batch records. |
2960 |
BatchProductFilter |
Allows to specify a certain filter for the product name. Products which do not match the filter criteria will be discarded. |
5331 |
BatchRecent |
JSON document for the most recent completed batch. |
5229 |
BatchRecentTimestamp |
The time when the recent batch was completed. |
5246 |
BatchRecordName |
The name of the batch record data source, in case the user did not enter an object name. |
2996 |
BatchReportOrder |
The order number for the Batch Report. |
5254 |
BatchSectionOverwrite |
Determines whether a certain field shall be assigned to a non-default, explicit section in the batch record. |
5245 |
BatchStopOptions |
Select one or multiple options to determine the transition to inactive state. |
5225 |
BatchTagConfiguration |
Compound for additional tag configuration for batch records. |
3013 |
BatchTrackerDiagnostics |
Runtime Diagnostics. |
5230 |
BatchTrackerMode |
The processing mode of the batch tracker object. |
5232 |
BatchTrackerOptions |
Compound for batch tracker general options. |
5231 |
BatchTrackingDocuments |
The persisting JSON documents for the active and recently completed batch. |
5227 |
BatchTrendGroups |
Array compound for batch trend data. |
5265 |
BatchTrendPens |
Definition of batch trend pens. |
5268 |
BatchUnitActive |
When switched off, it is allowed to exclude certain configured units from being processed. |
5329 |
BatchUnitConfiguration |
Compound for the unit configuration for batch records. |
2963 |
BatchUnitHistoryFetches |
When switched off, it is allowed to exclude certain configured units from being included in refetches of historical batch data. |
5330 |
BlacklistItem |
Items listet here are not included in the discovery process. |
560 |
BlacklistNode |
Nodes listet here are not included in the discovery process. |
559 |
BlockName |
A logical name for this configuration block. |
4102 |
BootstrapServers |
Initial list of brokers as a CSV list of broker host or host:port. |
6549 |
BrokerAddress |
The hostname or IP address of the broker to connect to. |
6550 |
BrokerAddressFamily |
Allowed broker IP address families: any, v4, v6. |
6626 |
BrokerAddressTtl |
How long to cache the broker address resolving results. |
6625 |
BrokerPort |
The network port to connect to. Usually 1883. |
6551 |
BrokerVersionFallback |
Older broker versions (before 0.10.0) provide no way for a client to query for supported protocol features (ApiVersionRequest) making it impossible for the client to know what features it may use. As a workaround a user may set this property to the expected broker version and the client will automatically adjust its feature set accordingly if the ApiVersionRequest fails (or is disabled). The fallback broker version will be used for .ApiVersionFallbackMs. Valid values are: 0.9.0, 0.8.2, 0.8.1, 0.8.0. Any other value >= 0.10, such as 0.10.2.1, enables ApiVersionRequests. |
6650 |
BrowseBranchesOnly |
When this option is set, the system will browse only branches of the OPC Server in system:inmation’s namespace. |
526 |
BrowseControlDataSource |
Controls the behaviour of browsing. |
488 |
BrowseControlNode |
Control the behaviour of browsing nodes. |
491 |
BrowseDepth |
Limits the maximum depth of address space hierarchy levels browsed. |
5338 |
BrowseExclude |
Exclude this node from browse. |
492 |
BrowseFilterBranches |
Include branches (nodes) of this OPC Server in system:inmation’s namespace which correspond to this filter string; i.e. '*control*' to include only branch names which contain the string 'control'. Generally filtering must be supported by the OPC Server implementation. The OPC Foundation defines the filter string to work conforming to the Visual Basic LIKE operator. |
522 |
BrowseFilterFlat |
The filter which will be applied to browse that datasource if "Browse Flat" is selected. Generally filtering must be supported by the OPC Server implementation. The OPC Foundation defines the filter string to work conforming to the Visual Basic LIKE operator. |
489 |
BrowseFilterLeaves |
Include leaves (items) of this OPC Server in system:inmation’s namespace which correspond to this filter string; i.e. '*PV' to include only item names which ends with the string 'PV'. Generally filtering must be supported by the OPC Server implementation and may be case-sensitive depending on the OPC Server. The OPC Foundation defines the filter string to work conforming to the Visual Basic LIKE operator. |
523 |
BrowseFlat |
Enforce flat browse if the datasource supports flat browsing. All I/O-Items will be added directly to the datasource without any node structure. |
494 |
BrowseLimits |
Controls the number of browsed items. |
5334 |
BrowseOptions |
The configuration of the automatic browsing of the Server. |
485 |
BrowsePeriod |
The interval for the periodic browsing of the server namespace. |
487 |
BufferOptions |
Compound for Cloud Sink buffer properties. |
11884 |
BufferPercentLoad |
Ratio of the current number of records in the buffer to the buffer size. |
11889 |
BufferPeriod |
This property specifies time interval between cloud connections. |
11885 |
BufferSize |
This property specifies buffer size. |
11886 |
BufferWrappingOptions |
This property compound specifies buffer data wrapping options. |
11887 |
BuiltinFeatures |
Indicates the builtin features for this build of librdkafka. |
6601 |
BypassDiscoveryRules |
Bypass the discovery rules of data sources and items as described on the Black and White lists. |
483 |
BypassMode |
Activate bypass mode. No data will be sent to sink interface. Write callback can be used to process messages in Lua. |
12108 |
BypassTarget |
Configure optional target object, that receives sink data when in bypass mode. |
12109 |
BytesProcessed |
The total size of the recently processed data package. |
4157 |
CallProportion |
The proportion of the overall call time used for the operation. |
6753 |
CallbackError |
Callback called in case of a failed data transfer. The returned function accepts 3 input parameters: sink_data - the data that was transferred through the sink object, sink_perf - a table with operation performance, err_msg - the error message returned from the sink function. |
11879 |
CallbackOptions |
Compound for callback functions. |
11877 |
CallbackSuccess |
Callback called in case of a successful data transfer. The returned function accepts 2 input parameters: sink_data - the data that was transferred through the sink object, sink_perf - a table with operation performance. |
11880 |
CallbackWrite |
Callback called when writing to the sink object. The returned function accepts 1 input parameters: sink_data - the data that was transferred through the sink object. If this function returns a value it will overwrite the transferred value. |
11878 |
CertificateAuthority |
A file containing the PEM encoded trusted CA certificate files. Either .CertificateAuthorityPath or .CertificateAuthority should be specified to enable certificate based SSL/TLS support. Note: .CertificateAuthorityFile property will be prioritized over .CertificateAuthority if both specified. |
6718 |
CertificateAuthorityFile |
Path to a file containing the PEM encoded trusted CA certificate files. Either .CertificateAuthorityPath or .CertificateAuthority should be specified to enable certificate based SSL/TLS support. Note: The path specified in this property is related to the system where Connector is running. Note: .CertificateAuthorityFile property will be prioritized over .CertificateAuthority if both specified. |
6558 |
ChartInfoColumnDisplayName |
Overrides the default info column name (header) for charts in this group. |
2105 |
ChartType |
Chart type selector. |
1938 |
ClassID |
The ClassID (COM CLSID) of an OPC server is a special form of a globally unique Identifier (GUID) of an OLE objects. It is a 16 byte value, which holds 32 hexadecimal digits in groups (8-4-4-4-12) and in curly brackets ike {F9043C85-F6F2-101A-A3C9-08002B2F49FB}. |
34 |
CleanSession |
Set to true to instruct the broker to clean all messages and subscriptions on disconnect, false to instruct it to keep them. |
6555 |
CleaningEducts |
Allows to reclassify regular educts to materials used for cleaning. |
6573 |
ClientCertificate |
A file containing the PEM encoded certificate file for this client. If both .ClientCertificateFile and .ClientCertificate properties are NULL, .ClientKeyFile and .ClientKey properties must also be NULL and no client certificate will be used. Note: .ClientCertificateFile property will be prioritized over .ClientCertificate if both specified. |
11868 |
ClientCertificateFile |
Path to a file containing the PEM encoded certificate file for this client. If both .ClientCertificateFile and .ClientCertificate properties are NULL, .ClientKeyFile and .ClientKey properties must also be NULL and no client certificate will be used. Note: .ClientCertificateFile property will be prioritized over .ClientCertificate if both specified. |
6559 |
ClientKey |
A file containing the PEM encoded private key for this client. If both .ClientKeyFile and .ClientKey properties are NULL, .ClientCertificateFile and .ClientCertificate properties must also be NULL and no client certificate will be used. Note: .ClientKeyFile property will be prioritized over .ClientKey if both specified. |
11869 |
ClientKeyFile |
Path to a file containing the PEM encoded private key for this client. If both .ClientKeyFile and .ClientKey properties are NULL, .ClientCertificateFile and .ClientCertificate properties must also be NULL and no client certificate will be used. Note: .ClientKeyFile property will be prioritized over .ClientKey if both specified. |
6560 |
ClientTimeout |
Value in seconds for the client communication timeout. Connections from non-service clients to the core service (e.g. from DataStudio) are considered to be unavailable and are terminated after the specified timeout if no data is transmitted. |
2206 |
CloudSinkAdvancedOptions |
Advanced Cloud Sink parameter. |
11881 |
CloudSinkDiagnostics |
Maintains the diagnostic properties of this object. |
6734 |
CloudSinkInterface |
Compound to define the interface. |
6733 |
CloudSinkParameter |
Cloud History Sink Configuration. |
6731 |
CodePage |
Select the code page which was used when the file was created. |
1288 |
CodePageDB |
Select the code page which is used by the database. |
2934 |
CodePageFile |
Select the code page which will be used to encode the file. |
4140 |
CodePageOS |
Select the code page which will be used to translate file and folder names between UTF-8 and ASCII when operating system calls are invoked. In most cases the default code page (Current Code Page) will work. |
6508 |
ColumnHeaderRows |
An extensible set of properties which define the order and content of column headers. |
1232 |
ColumnName |
The column name for which the option is configured. |
1949 |
ColumnOptions |
Additional options to apply per column name. |
1951 |
CommandID |
Identifies a command taken from the command stack. |
138 |
CommunicationSettings |
Configure the communication settings. |
591 |
CompletionCode |
The code taken from 'PM_STATUS' of the APRM Batch Record, which indicates the final stage of completion. The default value is 20. Please note: in case a different code shall set the unit batch complete, in the Field Configuration a Header Filed Option has to be configured which maps the Source Field 'PM_STATUS' to the target field 'Batch Status' with direct field processing. |
6565 |
ComponentConnectionMode |
Configure how the connection between the inmation core service and a remote component is established. |
1812 |
ComponentUpdateVerification |
Update verification policy for remote component updates. |
2204 |
ComponentVersionPolicy |
Use this to configure exceptions to component auto-update. |
725 |
CompressionCodec |
Compression codec to use for compressing message sets. |
6690 |
CompressionLevel |
Compression level parameter for algorithm selected by configuration property .CompressionCodec. Higher values will result in better compression at the cost of more CPU usage. |
6703 |
ComputerConfiguration |
Configuration of the computer names. |
2845 |
ConfigurationProblems |
This table holds possible configuration problems. |
5221 |
ConfirmedUpdateRate |
The Update Rate which was confirmed by the server. |
149 |
ConnectionIdent |
Connection ID. |
233 |
ConnectionParameters |
The MQTT client connection parameters. |
6724 |
ConnectionStatus |
Connection Status. |
234 |
ConnectionString |
The connection string for the external system; depending on the type of connection. |
246 |
ConnectorOptions |
Connector options (for later use). |
484 |
ConnectorPath |
Select the connector which shall act as the service host for the history sink. |
4149 |
ContextCall |
User provided script which receives a table with the following entries: ExternalID. ExternalID supplies the configured Tag Name, which is known in the external system. The table must be returned with an new 'context' field, containing a table for each entry supplying multiple possible context attributes. Known context attributes are: DESCRIPTION, EU, RANGELOW, RANGEHIGH, LIMITLOW, LIMITHIGH. Additional a 'timeout' parameter will be supplied, which is the latest moment of the user script terminating. in case you experience overload, consider adjusting the 'Slicing' parameter of the HistoryTransporter object. Running a HistoryTransporter in constant overload is not considered an inmation support case. |
6581 |
ContextDiagnostics |
The diagnostic properties of this object. |
6758 |
ContextPath |
Definition of the context path for the WebAPI. |
2876 |
ContextRevalidation |
Determines the period after which a tag context refetch from the source will occur. |
5220 |
ContinuousDiagnostics |
The diagnostic properties of this object. |
6759 |
ControllerStatus |
This table holds the entire current status for this controller. |
3046 |
ConversionMappingTable |
Contains the mapping table for state conversion. |
2460 |
ConversionMode |
The mode of conversion that needs to be done on input data. |
2451 |
ConversionUTF8 |
Switch the UTF-8 Conversion on, if the database returns ASCII. |
2933 |
CoreConnectTimeout |
Specifies the timeout to create a TCP connection to the core. |
2814 |
CoreReceiveTimeout |
Specifies the amount of time that a request will block to receive data from the core. This time is measured in milliseconds. |
2816 |
CoreSendTimeout |
Specifies the amount of time that a request will block to be able to send data to the core. This time is measured in milliseconds. |
2815 |
CoreServerPort |
TCP Server port for the inmation core server communication with user processes. This port must be accesible through your network and firewall infrastructure. |
208 |
CreateTemplate |
Use flexible item names when a report is created, this allows to use this report as a template. |
2130 |
Credentials |
Configure username and password for the MQTT client. This is only supported by brokers that implement the MQTT spec v3.1. By default, no username or password will be sent. If username is NULL, the password argument is ignored. |
6556 |
CurrentActiveState |
Current Active State. |
5257 |
CurrentBatchID |
Current Batch ID. |
5261 |
CurrentEquipmentState |
Current Equipment State. |
5256 |
CurrentOperation |
Displays the current S88 operation as detected by the batch tracker object. |
5286 |
CurrentScriptResult |
Current Script Result. |
5258 |
CurrentSource |
The source whose data updates are being considered right now. |
2502 |
CurrentTime |
The current time (UTC) as known by the Web API Server. |
2852 |
CustomAnalytics |
User defined analytics scripts. |
5346 |
CustomColor |
Accepts color name or RGB value. |
11995 |
CustomConnection |
Compound for custom scripts. |
6582 |
CustomDataSetQueryOptions |
Options to configure Report Designer datasource Custom Data Set. |
2375 |
CustomDataStoreDisableMonitoring |
Disable monitoring of the Custom Data Store MongoDB connectivity. |
5210 |
CustomEventDatabase |
The user-defined database storing event data. |
12138 |
CustomEventStore |
Custom event data store configuration. |
12136 |
CustomMarkup |
Defines a custom markup, which is assigned to each KPI-Model object under the maintenance of the ITLogAnalyzer. |
3079 |
CustomOptions |
Compound to hold various structures to customize the object and to be read and written to by Lua-Script code or external interfaces. |
1240 |
CustomProductionTrackingDatabase |
The user-defined database storing Batch Production Tracking data. |
12150 |
CustomProductionTrackingStore |
Custom Production Tracking data store configuration. |
12148 |
CustomProperties |
This is an extensible set of named strings which can be used programmatically for custom purposes. |
1243 |
CustomPropertyName |
A custom property name which can be used programmatically. |
1246 |
CustomPropertyValue |
The value of the custom property which can be read and written programmatically. |
1247 |
CustomString |
A generic string buffer to be used programmatically for custom purposes. |
1242 |
CustomTableName |
A custom table name which can be used programmatically. |
2774 |
CustomTables |
This is an extensible set of named tables which can be used programmatically for custom purposes. |
2773 |
CustomTimeSeriesBuffer |
Custom time series buffer configuration. |
12039 |
CustomTimeSeriesRetention |
The retention period for the particular custom data store, a value of will set it to unlimited retention. |
12065 |
CustomTimeSeriesStore |
Custom time series data store configuration. |
12038 |
CustomUOM |
Custom unit of meassurement in case the list above doesn't contain the UOM you need. |
5180 |
DBRoutingInfo |
This property can be used to direct SQL-commands to multiple different RDBMS. |
3064 |
DCOMCredentials |
DCOM Credentials for the communication accross a network. |
520 |
Data |
A diagnostic table holding the top rows of the most recent query execution. |
6447 |
DataAvailability |
Shows the overall data availability quota related to all configured tags and the operation mode, which was calculated during the most recent run. |
2805 |
DataCall |
User provided script which receives a table with the following entries: ExternalID, DataFrom, DataTo, History. ExternalID supplies the configured Tag Name, which is known in the external system. DataFrom and DataTo specify the acquisition time frame in POSIX miliseconds since epoch. History is a boolean, if true the call is a history call, else it is a continuous call. Additional parameters are: timeout, throttle, pointlimit. The table must be returned with an new 'data' field, containing a table {V=, Q=, T=}. The 'Q' field is optional, the 'T' field must contain a POSIX millisecond value. Additional a 'timeout' parameter will be supplied, which is the latest moment of the user script terminating. In case you experience overload, consider adjusting the 'Slicing' parameter of the HistoryTransporter object. Running a HistoryTransporter in constant overload is not considered an inmation support case. Full function signature: return function(tbl,timeout,throttle,pointlimit). |
6580 |
DataObjectPath |
Path to an object which has a dynamic value. |
12018 |
DataProcessing |
The properties required for data processing. |
6452 |
DataProcessingScript |
The script, which will be executed for each row of data. |
6451 |
DataStoreConfiguration |
Data store configuration compound. |
12046 |
DataStoreSets |
Maps sets of data stores to logical groups. |
12045 |
DataStudioVersion |
The version of DataStudio. |
2472 |
DataTransformation |
Compound for user-defined scripts to overwrite the actual VisualKPI value. |
6596 |
DatasourceBlacklist |
A blacklist is a list of Datasources (separated by TAB) that are not automatically added to the hierarchy when discovered. If both the blacklist and the whitelist are empty, all discovered Datasources will be automatically added. If not, the blacklist has precedence over the whitelist. The default value "inmation.OPC.Server.1" prevents an installation on a single server from a "short-circuit". For cascaded systems with remote connections this entry may be deleted. |
1884 |
DatasourceDiscoverySuppression |
Connector options, disabling distinct discovery mechanisms. |
915 |
DatasourceMaxPendingWrites |
Maximum number of pending writes. |
5178 |
DatasourceOperationalLimits |
Customizable operational limits for the datasource. |
5179 |
DatasourcePath |
Select the Datasource which shall act as the parent for this HistoryTransporter. Alternatively a Connector can be selected. |
3084 |
DatasourceWhitelist |
A whitelist is a list that name the Datasources (separated by TAB) that may be automatically added to the hierarchy when they are discovered. If the whitelist is empty all discovered Datasources will automatically be added, as long as they are not listed in the blacklist. The blacklist has priority over elements in the whitelist. The default whitelist value is empty. |
1885 |
Debug |
Additional debug messages will be generated in the event log. It is advised to not use this option in production mode. |
2959 |
DebugCOMCalls |
Define which COM calls will be saved in the system log for debugging purposes. Please be aware that a huge number of additional network messages will be created and thus the debugging option should not be used regularily. |
539 |
DebugLevel |
Please only change this as instructed by Support. |
916 |
DecimalPlaces |
The maximum number of decimal digits that will be displayed to the right of the decimal point. |
530 |
DecimalSeparator |
Defines an alternative decimal separator. If left empty, the system default of the core computer will apply. |
4159 |
DedicatedThreadExecution |
When set, the item executes in a thread not shared with other items. |
917 |
DeepDebug |
The entered source streams will be subject of “deep debugging” in Debug mode. |
5312 |
DefaultChartExpansion |
Default chart expansion. |
2115 |
DefaultChartView |
Default chart view. |
2110 |
DefaultEquipmentPath |
Equipment item which is used as default for new Calendar display. |
6735 |
DefaultGroupExpansion |
Default group expansion. |
2113 |
DefaultGroupSettings |
Default group settings. |
2117 |
DefaultGroupView |
Default group view. |
2108 |
DefaultKPIExpansion |
Default KPI expansion. |
2114 |
DefaultKPIView |
Default KPI view. |
2109 |
DefaultTab |
Overrides the default tab selection (Groups, KPIs, Charts, etc.) when the Group is selected. |
2107 |
DefaultTableExpansion |
Default table expansion. |
2116 |
DefaultTableView |
Default table view. |
2112 |
DelayReflection |
The end time stamp for continuous data requests will be increased by the configured Invocation Delay value. |
6762 |
DeliveryReportOnlyError |
Only provide delivery reports for failed messages. |
6692 |
Depth |
Defines the depth to fetch history data which shall be transfered, e.g. '*-10Days' will fetch the data of the last 10 days. |
2783 |
Description |
Additional information. |
732 |
DiagnosticLogging |
Enable/Disable logging for diagnostic purposes. |
6528 |
Diagnostics |
Diagnostics. |
2992 |
DirPollingMode |
The method that is used to determine changes within a directory. |
348 |
DirPollingPeriod |
The period, in hours, between single directory polling attempts. |
349 |
DirectoryBrowsingEnable |
Allows users to browse through the static content directory. |
5213 |
DiskFilePath |
The path where the connector service will save the files. |
4107 |
DiskFolder |
The folder on a disk drive where the dropzone files are monitored. This folder location is relative to the file system, which belongs to the host computer running the component service executing the object. |
598 |
DiskLog |
If enabled, this object will log detail operations to the disk log folder. |
718 |
DisplayAlias |
Alternate label for objects to be used for easier identification in the displays. |
29 |
DisplayFormat |
Select if and how the displays shall visually arrange the value and its engineering unit. |
941 |
DisplayOrder |
Numeric value that overrides the default alphanumeric order of KPIs. KPIs without explicit display order will be sorted alphanumerically and displayed below KPIs with display order values explicitly set. |
921 |
DistinctOperationID |
Operation ID. |
5281 |
DistinctOperationName |
Operation Name. |
5282 |
DistinctOperationParameters |
Operation Parameters. |
5280 |
DivisionNode |
Defines the division node where the KPI objects are created. |
3078 |
Domain |
A (Windows) domain name to which a particular computer or user account belongs. |
53 |
DomainCredentials |
Domain Credentials which are used to log on to Microsoft Windows. |
346 |
DotNetVersion |
The .NET version determined on the host computer. |
11897 |
DropzoneColumnHeaderProcessingOptions |
Specifies the way column headers are processed. Does only apply when column-based time series data is processed by the dropzone object. |
1144 |
DropzoneColumnsHierachy |
Specifies the number of columns to be interpreted as IoNode hierarchy. |
1207 |
DropzoneFilenameProcessingOptions |
This property compound holds options which define the information extraction from the filename of the dropped files. |
1154 |
DropzoneNewItemPreset |
Presetting properties of newly created items based on Dropzone file intake. |
1172 |
DropzoneOptions |
Property compound holding various dropzone options. |
1115 |
DropzoneProcessing |
The type of processing which will be applied to a distinct dropzone datasource. |
600 |
DropzoneRetrieveInformationFromFilename |
Specifies whether the filename shall be looked up for additional information in general. |
1155 |
DropzoneRevertToOriginalFilename |
If switched on, files are moved to the processed folder by their original name. |
1117 |
DropzoneSaveToProcessed |
If switched on, files which are successfully processed by the Dropzone parser are moved from the work folder to the 'processed' folder. Regularily such files are completetly removed. |
1114 |
DropzoneSkipColumns |
Specifies the number of columns to skip. |
1248 |
DropzoneTimestampColumn |
Defines whether and how to interpret the timestamp column for column-based time-series imports. |
1180 |
DropzoneTimestampFormat |
A string format mask specifying the interpretation of the timestamp. For Example "%d.%m.%Y %H:%M" for "01.12.2016 17:00" (q.v. http://www.boost.org/doc/libs/1_41_0/doc/html/date_time/date_time_io.html). In case you use ISO8601-compliant timestamps, this format does not need to be specified. |
1182 |
DropzoneTimestampProcessingOptions |
This property compound holds options which define the timestamp interpretation. |
1177 |
DynamicVariables |
Allows to define a list of variable names, which will be replaced with the respective script function. All variables need to be decorated with double underscore before and after the variable name, e.g. __MYVAR__. |
6460 |
EdgeDuration |
Sets the time for the rising edge in seconds (0 equals to infinite, the edge needs to be reset externally). |
2668 |
EductOptions |
Allows to classify educts. |
6572 |
EffectiveMongoDBUri |
The actual MongoDB URI used for current connection. |
6530 |
Embedded |
If this switch is set, this group is embedded. |
5267 |
Enable |
Enables the static content server feature. The URL to access the root directory of the static content is \static. |
5211 |
EnableActivityMonitoring |
Enable the activity monitoring. |
569 |
EnableIdempotence |
When set to true, the producer will ensure that messages are successfully produced exactly once and in the original produce order. |
6680 |
EnablePollingTimeoutErrors |
Set to true to rise an error in case of a polling timeout. It is recommended set this property value to false if .PollingTimeout is 0. |
6723 |
EnableTimeoutErrors |
Set to true to rise an error in case of a publishing timeout. It is not recommended not set this property value to true if .PublishTimeout is 0. |
6722 |
Endtime |
Defines the end time for the export, if empty the most recent timestamp of the configured objects will be used. |
4119 |
EnterpriseNode |
Defines the enterprise node where the KPI objects are created. |
3077 |
EnvText |
This is a placeholder for later functionality. |
594 |
EquipmentAssignment |
Select the object from the S95 equipment model which shall be assigned to the batch tracker object. |
5234 |
EternalState |
internal use only, invisible, unconfigurable, not volatile. |
2864 |
EventAmplification |
Creates the given number of artificial events for each real event which was recorded from the source. Do not use this option for productive systems. |
1197 |
EventAttributes |
This table contains optional event attributes. |
6491 |
EventCollectionStrategy |
Use this setting to define how granular the raw history collections will be organized in the data store. |
658 |
EventCustomAttribute |
The custom attribute which will be filtered by the filter text. |
5277 |
EventCustomParameters |
Compound for event custom attribute parameters. |
5276 |
EventDebugOptions |
Debug options for event and attribute amplification. |
1196 |
EventField |
The field which will be filtered by the filter text. |
5274 |
EventFieldParameters |
Compound for event field parameters. |
5273 |
EventFieldSelection |
The event field selection. |
5278 |
EventFilterCategories |
List of RegEx strings which will be evaluated against the event categorie field. |
12168 |
EventFilterConditions |
List of RegEx strings which will be evaluated against the event conditions field. |
12169 |
EventFilterMessages |
List of RegEx strings which will be evaluated against the message field. |
12165 |
EventFilterNewStates |
Event new state filters to select one or multiple new event states. |
12171 |
EventFilterOptions |
Options to filter events. |
12160 |
EventFilterScript |
A Lua script returning true or false when passed in a event document. |
12162 |
EventFilterSeverities |
Allows to filter for multiple severity ranges. |
12175 |
EventFilterSeverityFrom |
Lower limit for the severity filter of events. |
12173 |
EventFilterSeverityTo |
Upper limit for the severity filter of events. |
12174 |
EventFilterSources |
List of RegEx strings (eg. '\\^/System/Core/obj1 \\^/obj2') which will be evaluated against the event source field. |
12164 |
EventFilterStateChanged |
Event state change filters to select one or multiple event state changes. |
12172 |
EventFilterStreams |
List of event stream object paths. |
12163 |
EventFilterSubConditions |
List of RegEx strings which will be evaluated against the event sub-conditions field. |
12170 |
EventFilterTypes |
Event type filters to select one or multiple event types. |
12166 |
EventItemUniqueCode |
The globally unique code for this event item which has been assigned by inmation core server. |
657 |
EventItemUniqueName |
The unique name for this event item which has been assigned by inmation core server. |
649 |
EventMainCategory |
Select the vendor-independent event category for this vendor category. |
661 |
EventModelType |
The type of events of an event node. |
653 |
EventPurgeMax |
The maximum number of BSON documents purged in a single batch operation. |
12155 |
EventPurgeOptions |
Controls what happens to an object's data in the store after the object's deletion. |
12156 |
EventRetention |
The maximum age of data in the archive. |
12154 |
EventStoreFriendlyFieldNames |
Use friendly field names in the event store. |
660 |
EventStoreSelector |
Configure Event Store that is queried by this display. |
12177 |
EventStream |
The event stream from which events shall be filtered and assigned to the Batch Production Record. |
5287 |
EventSubCategoryAPC |
Select the vendor-independent sub-category. |
675 |
EventSubCategoryBatchMessage |
Select the vendor-independent sub-category. |
672 |
EventSubCategoryOperatorAction |
Select the vendor-independent sub-category. |
668 |
EventSubCategoryOther |
Select the vendor-independent sub-category. |
676 |
EventSubCategoryPartStrokeTest |
Select the vendor-independent sub-category. |
665 |
EventSubCategoryProcessAlarm |
Select the vendor-independent sub-category. |
663 |
EventSubCategoryProcessMessage |
Select the vendor-independent sub-category. |
671 |
EventSubCategorySystemEvent |
Select the vendor-independent sub-category. |
670 |
EventSubCategoryUnassigned |
Select the vendor-independent sub-category. |
666 |
EventSubType |
The Batch Production Record event sub type according to ISA S88. |
5291 |
EventType |
The Batch Production Record event type according to ISA S88. |
5290 |
ExecFunctionAllowAnonymous |
Specifies the execute function feature is available for anonymous users. |
2821 |
ExportAggregationPeriod |
The desired aggregation period for the export. |
4127 |
ExportFolder |
The folder on a disk drive where the export file will be saved. |
4134 |
ExportUTF8 |
If switched on the exported files will be UTF-8 encoded, if switched off the selected code page will be used to create ASCII files. |
4139 |
ExporterConfiguration |
Configuration of the history exporter object. |
4117 |
ExporterFileParameter |
Parameter to save History Exporter files. |
4144 |
ExporterStatus |
The most recent status of the exporter object. |
4115 |
Extensions |
Define the permission for users to add annotations and extensions to the Batch Production Record. |
6738 |
ExtensionsPermitted |
Users may extent the Batch Production Record with additional data. |
6741 |
ExtensionsTimeLimit |
The time span in which annotations and extensions can be applied to the Batch Production Record with respect to ist machine level completion state. Note: fractional days such as 0.5 are valid entries. |
6742 |
ExternalHeartbeat |
External tag name which receives the history transfer controller heartbeat. |
5324 |
ExternalUsers |
Check this if the role is assigned to users external to the company. |
273 |
FeedbackConfig |
Compound for configuring write feedback specific behavior. |
4091 |
FeedbackIncludeCurrentValue |
Include the current feedback value when comparing values. |
5351 |
FeedbackInfo |
Compound for informational data for feedback writes. |
4096 |
FeedbackInitialWriteDelay |
The delay in milliseconds between writing an initial value to the target object and writing the actual value. |
5364 |
FeedbackItemValue |
The current value of the FeedbackItem. |
4093 |
FeedbackLogFailure |
The log severity of failed feedback writes. |
4137 |
FeedbackLogSuccess |
The log severity of successful feedback writes. |
4136 |
FeedbackSingleFeedback |
Object path for write feedback confirmation. |
4084 |
FeedbackSingleFeedbackInit |
Initialize the feedback target on each write operation. |
5352 |
FeedbackSingleInitType |
The type of the initial value for feedback or write targets. |
5355 |
FeedbackSingleInitValue |
The initial value for feedback or write targets. |
5356 |
FeedbackSingleTarget |
Target object path for feedback writes. |
4083 |
FeedbackSingleTargetInit |
Initialize the write target on each write operation. |
5353 |
FeedbackSingleWrite |
Compound for configuring single write behavior. |
4082 |
FeedbackState |
The current state of a feedback write. |
4090 |
FeedbackStrictTypeMatch |
If checked, the value being written and the received feedback value are required to have the same type. Otherwise, type-mismatches are allowed when comparing feedback values: single and double-precision floating point values are allowed to match and different integer types are matched if their value ranges are compatible. |
4158 |
FeedbackStructuredSubset |
Allow a subset of targets in structured feedback writes. |
4087 |
FeedbackStructuredTable |
A table specifying the targets and feedback paths for a coherent structured write. |
4086 |
FeedbackStructuredWrite |
Compound for configuring structured write behavior. |
4085 |
FeedbackTimeout |
The time-out in milliseconds for a write without feedback to be considered a failure. |
4088 |
FeedbackTolerance |
The tolerance (epsilon) to be used when comparing floating point values of the original write with feedback data. If not set, a default value such that 1.0 + eps != 1.0 is used. |
4089 |
FeedbackToleranceAbsolute |
If checked, the tolerance is interpreted as an absolute value when comparing floating point values. Otherwise, the tolerance is relative to the values being compared. |
4114 |
FeedbackWriteCount |
The number of total writes to a FeedbackItem. |
4094 |
FeedbackWriteFailureCount |
The number of total write failures of a Feedbackitem. |
4097 |
FeedbackWriteMode |
The write mode of the FeedbackItem. |
4081 |
FeedbackWriteOptions |
Compound for configuration options of external writes executed as part of a feedback write. |
4099 |
FeedbackWriteSuccessCount |
The number of total write successes of a Feedbackitem. |
4098 |
FetchSnapshots |
Idle times between context, history and continuous calls will be used to refresh snapshot values. |
6747 |
FieldActive |
Sets the data collection of this batch field active. |
5253 |
FieldAliasNameParameter |
Compound for alias name parameters. |
3045 |
FieldDataCollection |
Determines how the data points are collected for a distinct field in the batch record. |
5244 |
FieldFixedValue |
A fixed value will be assigned to the field. |
2977 |
FieldFixedValueParameter |
Compound for fixed value parameters. |
3028 |
FieldHeaderOptions |
Header Field Options. |
2980 |
FieldInput |
Defines the input object for the characteristic. |
5243 |
FieldLabel |
Defines the label for the characteristic. |
5242 |
FieldMappingExclusive |
If this switch is set, the mapping must be found in the mapping table, otherwise an error will be returned. If this switch is not set, the original input value will be returned without raising an error. |
5260 |
FieldMappingTable |
Raw field values will be translated according to the mapping table. |
2978 |
FieldMappingTableParameter |
Compound for mapping table parameters. |
3029 |
FieldProcessing |
The processing mode of this field. |
2976 |
FieldScript |
The custom function is called each time the batch characteristics data is refetched from the source
The following parameters are given
- input (table) - a table holding information about the field configuration and recent data
The function is expected to either return a single value or a table having v,q,t fields. |
2979 |
FieldScriptParameter |
Compound for field script parameters. |
3030 |
FieldSource |
The name of the source field. |
2974 |
FieldTarget |
The name of the target field. |
2975 |
FieldUnitOptions |
Unit Field Options. |
2981 |
FileActions |
Compound to define one or more actions which will be performed on the file. |
6492 |
FileMonitorDiagnostics |
A set of diagnostic properties. |
6509 |
FileOrganization |
The type of organization within the output file. |
4108 |
FileOwner |
Sets the owner object for the files in the store. |
6500 |
FileStoreDatabase |
The database storing files. |
6437 |
FileType |
The types of files which are monitored in a dropzone folder. |
599 |
FilenameInfo |
An extensible set of properties which define the interpretation of a file name. |
1160 |
FilenameInfoOrder |
The order of a chunk of information as part of the filename. This is not the character count, but the logical sequencial order. |
1158 |
FilenameInfoSeparator |
The termination string for a chunk of information in a certain filename. |
1156 |
FilenameInfoToIoNode |
If this option is set, an IONode object with the appropriate name is created. |
1173 |
FilenameInfoTracking |
If switched on the Dropzone processor will issue production tracking events based on the information and timestamps found. |
1170 |
FilenameInfoType |
The type of information at the indicated position as part of the filename. |
1159 |
FilterDefinition |
Filter Definition. |
5289 |
FilterText |
The filter text expression which shall be applied to the event field. |
5275 |
FinalProcessingScript |
The script which will be executed after the last row of data has been read. The function's data parameter contains all rows, limitted by the Top Rows property. |
11901 |
FinalScript |
This script will be executed after the data has been processed for a particular batch document. |
5208 |
FolderHierarchy |
The folder hierarchy (separated by slash) below the connector selected above, where this history sink object will be created. |
4150 |
FolderOrganization |
Definition of the folder levels. |
4109 |
ForwardedPort |
This value, if set, will be used to connect to the component. Use this if the externally visible port is different from the listener port, as may happen with NAT and port forwarding. |
2373 |
FrequencyDrop |
A drop of the item update rate in percent which determines a missing vital sign of the object. |
571 |
FunctionPeriod |
The time after which a function repeats its values. |
380 |
FunctionalComponent |
This determines in which service component the object is functional. The default zero value denotes the Master Core. |
12135 |
GenerationArray |
Select array as generation type. |
372 |
GenerationArrayMaxElm |
Select the maximum number of array elements. |
373 |
GenerationMax |
Select the upper bound of generated values. |
371 |
GenerationMin |
Select the lower bound of generated values. |
370 |
GenerationPeriod |
This value defines the update interval of the value generation. The minimum is 100 milliseconds. If this value is equal to the Function Period, the generated value will be constant. |
369 |
GenerationType |
Select the generation type. |
366 |
GeoMapOptions |
Compound holding the geographical map options for the KPI visualization. |
1853 |
GlobalConfigurationProperties |
Kafka Producer's global configuration properties. |
6600 |
GroupContact |
Primary contact for this group. Can be individuals, separated by semicolons, or AD distribution lists. |
1874 |
GroupCount |
The total number of groups being managed by the server instance, mainly for diagnostic purposes. |
554 |
GroupID |
The Group ID which gets assigned by VisualKPI. |
1952 |
GroupInfoColumnDisplayName |
Overwrite the name of the group info. |
1862 |
GroupShow |
Show this group in the VisualKPI dashboard. |
1875 |
HDPath |
Path on a Hard drive. |
2422 |
HandshakeInterval |
Specifies the interval of the handshake requests initiated by the Web API to the core. This time is measured in seconds. |
2853 |
HeaderSQL |
The SQL merge command which will be used to insert the main product record into the target table. |
3024 |
HeartBeat |
Indicates the heartbeat of the object. |
2875 |
Hedging |
The absolute limit of points controls the processing of history and overwrites the slicing. If the maximum number of points was fetched from the external system further processing will stop for this particular processing cycle. |
2786 |
HiddenFlag |
Used without being visible. |
562 |
HistoricalValues |
Shows the absolute number of historical data transfers in the current cycle. |
5319 |
HistorizationMode |
Select the call types to be used in history and continuous mode. |
5341 |
HistoryAggregateList |
Select multiple History Aggregates to use. |
2135 |
HistoryControllerDiagnostics |
Maintains the diagnostic properties of this object. |
5169 |
HistoryControllerMode |
The processing mode of the history controller object. |
4153 |
HistoryControllerObjectConfiguration |
Configuration of the transfer blocks based on historizing inmation objects. |
4103 |
HistoryDiagnostics |
The diagnostic properties of this object. |
6760 |
HistoryExportEnd |
End time of the History Export. |
2344 |
HistoryExportStart |
Start time of the History Export. |
2343 |
HistoryExporterConfiguration |
Configuration of the tag transfer of the history exporter object. |
4116 |
HistoryExporterDiagnostics |
Maintains the diagnostic results. |
4135 |
HistoryExporterMode |
The processing mode of the history exporter object. |
4133 |
HistoryKeyConversion |
Configure Lua callbacks that are invoked for every pair in resulting JSON document. A converter function must be a compilable lua code returning a function, which receives a single input parameter - value. The returned value of the conversion function will overwrite the current value of the defined key. Some examples of lua conversion functions: 1) Basic pattern: "return function(value) --[[ conversion logic]] return value end"; 2) Converting unix epoch timestamp to ISO 8601 format or vice versa: "return inmation.gettime"; 3) Converting string to number: "return tonumber"; 4) Using user defined libraries: "return require('lib-converter').CONVERTER". |
12115 |
HistoryKeyIgnore |
A list of keys which should be excluded from the final document. |
12131 |
HistoryLimit |
Defines the maximum number of values which are fetched and forwarded per cycle. |
5172 |
HistoryMessageFormat |
Configure message format that is sent to HistorySink target. |
12114 |
HistoryProcessingTimeout |
If processing is taking more than specified number of milliseconds, operation will be terminated and an error thrown. 0 value will disable timeout completely. |
12132 |
HistoryQueryOptions |
Options to configure Report Designer datasource History. |
2127 |
HistoryRequest |
Select the request type to be used with history queries. |
5340 |
HistorySettings |
Compound for history settings of the batch record object. |
3056 |
HistorySinkAdvancedOptions |
Options which influences details of the data transfer to the sink. |
4163 |
HistorySinkDiagnostics |
Maintains the diagnostic properties of this object. |
4154 |
HistorySinkInterface |
Compound to define the interface. |
3081 |
HistorySinkObject |
The object path to a history sink object which will receive the exported files. |
4145 |
HistorySinkParameter |
History Sink Configuration. |
4111 |
HistoryTransferProgress |
Indicates the progress of the current history transfer operation. |
5323 |
HistoryTransporterConfiguration |
Configuration of the tag transfer of the history transporter object. |
2776 |
HistoryTransporterDiagnostics |
Maintains the diagnostic results. |
2799 |
HistoryTransporterMode |
The processing mode of the history transporter object. |
2863 |
HostArchitecture |
The host processor architecture. |
1220 |
HostCpuCores |
The number of CPU cores of the host. |
1227 |
HostDiskSize |
The size of the hard disk volume this service component is installed on. |
1231 |
HostInformation |
Information about the host system running the inmation service. |
1218 |
HostLogicalProcessors |
The number of logical processors of the host. |
1228 |
HostOSName |
The host operating system name. |
1219 |
HostOSVersion |
The host operating system version. |
1223 |
HostPhysicalMemory |
The amount of physical memory (RAM) installed in the host. |
1229 |
HostProcessorId |
The host processor ID. |
1226 |
HostSystemName |
The host system (computer) name. |
1225 |
HostnameOrIP |
The host name or IP address under which the Server can be reached. |
309 |
ID |
The unique identification. |
730 |
IP |
The IP address. |
13 |
IP21Connection |
Coumpound for IP21 and ODBC connection parameters. |
5207 |
IP21Options |
Compound for additional IP21 options. |
5206 |
IP21UpdateDelay |
Delay before each update call. |
12146 |
IP21WriteSettings |
Settings which only apply to write operations against IP.21. |
12147 |
ISO22400KPI |
This enables specific KPI-handling according to ISO224400. |
5182 |
ISO22400KPIOptions |
Compound that controls the ISO22400-KPI handling. |
5184 |
ISO8601Timestamp |
If this option is switched off the timestamp will be exported as numeric value (POSIX-time, milliseconds since UNIX Epoche). |
4130 |
ITLogAcqScript |
The Lua script function which must return a table of rows where each row is a key-value set of fields. Example:
return function()
local t={}
table.insert(t, {A="A",B="B",C="C"})
return t
end. |
2928 |
ITLogAcqTypeCustomScriptParam |
Compound for ITLog acqusition via custom script. |
2927 |
ITLogAcqTypeHTTPParam |
Compound for IT Log HTTP/HTTPS parameters. |
2540 |
ITLogAcqTypeODBCParam |
Compound for IT Log ODBC datasource parameters. |
2539 |
ITLogAcqTypeScriptParam |
Compound for IT Log powershell script parameters. |
2541 |
ITLogAcquisitionTypeSelection |
The type of data acquisition. |
2420 |
ITLogActualData |
Compound for ITLog Analytics. |
2925 |
ITLogAnalyticsDoneAt |
Local time when the analytics table was completed. |
2957 |
ITLogAnalyticsTable |
This table contains the harmonized result which forms the basis of ITLog analytics. |
2924 |
ITLogAppADDMParam |
Compound to hold the application parameters. |
2598 |
ITLogAppCommVaultParam |
Compound to hold the application parameters. |
2589 |
ITLogAppConnectedClientParam |
Compound to hold the application parameters. |
2581 |
ITLogAppDoubleTakeParam |
Compound to hold the application parameters. |
2595 |
ITLogAppGenericParam |
Compound to hold the application parameters. |
2593 |
ITLogAppLinuxParam |
Compound to hold the application parameters. |
2582 |
ITLogAppLiteSpeedParam |
Compound to hold the application parameters. |
2583 |
ITLogAppMaxDBParam |
Compound to hold the application parameters for MaxDB. |
2584 |
ITLogAppNetAppReplicationParam |
Compound to hold the application parameters. |
2596 |
ITLogAppNetAppStorageParam |
Compound to hold the application parameters. |
2599 |
ITLogAppNetworkerParam |
Compound to hold the application parameters. |
2591 |
ITLogAppRManParam |
Compound to hold the application parameters. |
2585 |
ITLogAppSolarisParam |
Compound to hold the application parameters. |
2587 |
ITLogAppTivoliParam |
Compound to hold the application parameters. |
2592 |
ITLogAppVeeamBackupParam |
Compound to hold the application parameters. |
2588 |
ITLogAppVeeamReplicationParam |
Compound to hold the application parameters. |
2955 |
ITLogApplNameGeneric |
The predefined KPI Name for this application. |
2931 |
ITLogApplTokenADDM |
The predefined KPI Token for ADDM. |
2615 |
ITLogApplTokenCommVault |
The predefined KPI Token for CommVault. |
2616 |
ITLogApplTokenConnectedClient |
The predefined KPI Token for Connected Client. |
2617 |
ITLogApplTokenDoubleTake |
The predefined KPI Token for DoubleTake. |
2618 |
ITLogApplTokenGeneric |
The predefined KPI Token for this application. |
2619 |
ITLogApplTokenLinux |
The predefined KPI Token for Linux. |
2620 |
ITLogApplTokenLiteSpeed |
The predefined KPI Token for LiteSpeed. |
2621 |
ITLogApplTokenMaxDB |
The predefined KPI Token for MaxDB. |
2622 |
ITLogApplTokenNetAppReplication |
The predefined KPI Token for NetApp (Replication). |
2623 |
ITLogApplTokenNetAppStorage |
The predefined KPI Token for NetApp (Storage). |
2624 |
ITLogApplTokenNetworker |
The predefined KPI Token for Networker. |
2625 |
ITLogApplTokenRMan |
The predefined KPI Token for Rman. |
2626 |
ITLogApplTokenSolaris |
The predefined KPI Token for Solaris. |
2627 |
ITLogApplTokenTivoli |
The predefined KPI Token for Tivoli. |
2628 |
ITLogApplTokenVeeamBackup |
The predefined KPI Token for Veeam. |
2629 |
ITLogApplTokenVeeamReplication |
The predefined KPI Token for Veeam. |
2956 |
ITLogAppsBackup |
The application of IT Log type backup. |
2566 |
ITLogAppsFileTransfer |
The application of IT Log type file transfer. |
2568 |
ITLogAppsInventory |
The application of IT Log type inventory. |
2570 |
ITLogAppsReplication |
The application of IT Log type replication. |
2569 |
ITLogAppsStorage |
The application of IT Log type storage. |
2571 |
ITLogConfiguratorReportedSize |
The unit to standardize all size and capacity information from subsystems. |
2953 |
ITLogConnStatus |
The most recent connection status of the ITLog. |
2958 |
ITLogCustomScriptParameter |
Compound for ITLog location assignment by a custom script. |
2906 |
ITLogDailyLocalHour |
The local hour for daily data acquisition. |
2609 |
ITLogDailyParam |
Compound to hold the daily schedule parameters. |
2608 |
ITLogDailyWaitTime |
The number of minutes to wait after the acquisition time has been reached (making sure that the external server has complete data). The wait time will only kick in if the hour matches the daily hour, or on each call when the hourly option has been chosen. |
2610 |
ITLogDatasourceReportedSize |
Defines how the size and capacity values from this datasource shall be interpreted. |
2951 |
ITLogDiagnostics |
Maintains the diagnostic properties of the ITLog. |
2842 |
ITLogDiagnosticsCallNext |
The time of the next data call runtime of this IT Log object. |
2941 |
ITLogDiagnosticsCallNumber |
The increasing call numbers with unchanged code behind for the IT Log object. |
2612 |
ITLogDiagnosticsCallStatus |
The most recent status of the IT Log object. |
2614 |
ITLogDiagnosticsCallTime |
The time of the last runtime of the IT Log obejct. |
2613 |
ITLogDiagnosticsLastCallFetchTime |
The time it took for the last call to fetch data. |
2943 |
ITLogDiagnosticsLastCallParam |
Compound to hold the last data call parameters of this IT Log object. |
2632 |
ITLogDiagnosticsLastCallProcessingTime |
The time it took for the last call to process the data. |
2944 |
ITLogDiagnosticsLastCallRecordCount |
The number of records fetched from the external server. |
2633 |
ITLogDiagnosticsLastCallRecordError |
The number of error records from the external server. |
2635 |
ITLogDiagnosticsLastCallRecordProcessed |
The number of processed records from the external server. |
2634 |
ITLogDiagnosticsLogDataFailureStatus |
The number of records indicating failure status. |
2637 |
ITLogDiagnosticsLogDataParam |
Diagnostics about the status distribution within the acquired data records. |
2636 |
ITLogDiagnosticsLogDataPendingStatus |
The number of records indicating pending status. |
2638 |
ITLogDiagnosticsLogDataRecentError |
The most recent faulty source record. |
2641 |
ITLogDiagnosticsLogDataRecentRecord |
The most recent successfully processed source record. |
2640 |
ITLogDiagnosticsLogDataSuccessStatus |
The number of records indicating success status. |
2639 |
ITLogDiagnosticsParam |
Compound to hold the diagnostics parameters. |
2611 |
ITLogDiagnosticsResult |
The recent result of this IT Log object. |
2631 |
ITLogFPSTables |
Defines the settings for failure/pending/success in the staging table. |
2948 |
ITLogFPSUTC |
Use UTC Timestamps. |
2949 |
ITLogFpsFailureTable |
Name of the table which stores the failure records. |
3005 |
ITLogFpsPendingTable |
Name of the table which stores the pending records. |
3006 |
ITLogFpsSuccessTable |
Name of the table which stores the success records. |
3007 |
ITLogGroupAssignment |
Determines how the group assignment for the log record occurs. |
2910 |
ITLogGroupConstantParameter |
Compound for IT Log group assignment by a constant value. |
2914 |
ITLogGroupCustomScriptParameter |
Compound for IT Log group options via custom script. |
2929 |
ITLogGroupFieldAnalytics |
The analytics target field to be set. |
2916 |
ITLogGroupFieldFixedValue |
The fixed value to be assigned to the analytics field. |
2918 |
ITLogGroupFieldMappingTable |
The mapped value to be assigned to the analytics field. |
2919 |
ITLogGroupFieldOptions |
Configuration of field assignments from the raw returned log data. |
2915 |
ITLogGroupFieldProcessing |
Determines how the field will be processed. |
2917 |
ITLogGroupFieldRaw |
The name of the field returned by the log query. |
2923 |
ITLogGroupOptions |
Determines how the group assignment for the log record occurs. |
2903 |
ITLogGroupScript |
The Lua script function which returns the value to be assigned to the analytics field. |
2930 |
ITLogGroupType |
Select the ITLog group type for this level. |
2836 |
ITLogHTTP1StepParam |
Compound for IT Log http/https 1-step authentication method parameters. |
2564 |
ITLogHTTP2StepAuthHeaderField |
The 2-Step Authentication Header Field. |
2558 |
ITLogHTTP2StepAuthRequest |
The authentication request for http/https 2 step authentication. |
2555 |
ITLogHTTP2StepAuthTokenPath |
The 2-Step Authentication Token Path. |
2557 |
ITLogHTTP2StepAuthURL |
The 2-Step Authentication URL. |
2556 |
ITLogHTTP2StepParam |
Compound for IT Log http/https 2-step authentication method parameters. |
2565 |
ITLogHTTPAuthenticationMethod |
The authentication method of http/https data. |
2553 |
ITLogHTTPDataDocument |
The fields which are prefixing the data sets in the encoded result. |
3001 |
ITLogHTTPDataRequestURL |
The data request URL for http/https data. |
2554 |
ITLogHTTPEncoding |
The type of http/https response encoding. |
2552 |
ITLogHTTPPassword |
The password for http/https. |
2551 |
ITLogHTTPUsername |
The user name for http/https. |
2550 |
ITLogHourlyParam |
Compound to hold the hourly schedule parameters. |
2945 |
ITLogHourlyWaitTime |
The number of minutes to wait after the acquisition time has been reached (making sure that the external server has complete data). The wait time will only kick in if the hour matches the daily hour, or on each call when the hourly option has been chosen. |
2946 |
ITLogKPICode |
The KPI code which shall be used for the group. |
2837 |
ITLogLocationAssignment |
Selection of the location assignment strategy. |
2578 |
ITLogLocationConstantParameter |
Compound for ITLog location assignment by a constant value. |
2904 |
ITLogLocationOptions |
Determines how the location assignment for the log record occurs. |
2902 |
ITLogLocationSiteCode |
The site code, which will be used as a constant site assignment for all records. |
2908 |
ITLogName |
The property which gives the ITLogDatasource a name in case the user did not enter an object name. |
2594 |
ITLogODBCDatabase |
The name of the ODBC database (optional). |
2548 |
ITLogODBCLinkedServer |
The name of the linked server (optional). |
2549 |
ITLogQueryADDM |
Query string for the ADDM data selection. |
2604 |
ITLogQueryCommVault |
The Query string for the CommVault data selection. |
2533 |
ITLogQueryConnectedClient |
The query string for the data selection. |
2526 |
ITLogQueryDoubleTake |
Query string for the DoubleTake data selection. |
2600 |
ITLogQueryGeneric |
Query string for generic data selection. |
2580 |
ITLogQueryLinux |
The query string for the data selection. |
2527 |
ITLogQueryLiteSpeed |
The query string for the data selection. |
2528 |
ITLogQueryMaxDB |
The query string for the data selection. |
2529 |
ITLogQueryNetAppReplication |
Query string for the NetApp Replication data selection. |
2601 |
ITLogQueryNetAppStorage |
Query string for the NetApp Storage data selection. |
2605 |
ITLogQueryNetworker |
The query string for the data selection. |
2534 |
ITLogQueryRMan |
The query string for the data selection. |
2530 |
ITLogQuerySolaris |
The query string for the data selection. |
2531 |
ITLogQueryTivoli |
The query string for the data selection. |
2535 |
ITLogQueryVeeamBackup |
The query string for the data selection. |
2532 |
ITLogQueryVeeamReplication |
Query string for the data selection. |
2954 |
ITLogRawDataTable |
The raw data fetched from the source. |
2926 |
ITLogRecentAcquisitionAt |
Local time of the most recent data acquisition. |
2940 |
ITLogRecentAcquisitionFrom |
Start time of the most recent data acquisition. |
2938 |
ITLogRecentAcquisitionTo |
Endtime of the most recent data acquisition. |
2939 |
ITLogRetainedFields |
This list defines the fields which have no special function for the analytics and are assigned to the Info column. |
2947 |
ITLogScheduleOperationMode |
The operation mode of the scheduler. |
2935 |
ITLogScheduleOperationModeR |
The (read only) operation mode of the scheduler. |
2937 |
ITLogScheduleParam |
Compound for query schedule parameters. |
2573 |
ITLogScheduleQueryPeriod |
The sample period type for IT Log data. |
2572 |
ITLogScript |
The Lua script function which returns the value, i.e. return function(raw) return raw[“FieldName”] end. |
2909 |
ITLogScriptCommandLine |
The command line to be used to invoke the powershell script. |
2607 |
ITLogScriptFile |
The file name of the PowerShell script. |
2559 |
ITLogScriptOutputFile |
The file name of the output file of the powershell script. |
2560 |
ITLogScriptPassword |
The password for the power shell script. |
2563 |
ITLogScriptUsername |
The user name for the power shell script. |
2562 |
ITLogTSCustom |
A string format mask specifying the interpretation of the timestamp. For Example "%d.%m.%Y %H:%M" for "01.12.2016 17:00" (q.v. http://www.boost.org/doc/libs/1_41_0/doc/html/date_time/date_time_io.html). In case you use ISO8601-compliant timestamps, this format does not need to be specified. |
2577 |
ITLogTSCustomParam |
Compound for timestamp format 'custom' parameters. |
2642 |
ITLogTSFormatSelection |
Defines how to interpret the timestamp. |
2576 |
ITLogTSLocal |
If this is checked it is assumed that the datasource provides timestamps as local time, if unchecked UTC timestamps are assumed. |
2575 |
ITLogTSParam |
This property compound holds options which define the timestamp interpretation. |
2574 |
ITLogTopBackupParam |
Compound for IT Log backup parameters. |
2521 |
ITLogTopFileTransferParam |
Compound for IT Log file transfer parameters. |
2522 |
ITLogTopInventoryParam |
Compound for IT Log Inventory parameters. |
2524 |
ITLogTopReplicationParam |
Compound for IT Log replication parameters. |
2523 |
ITLogTopStorageParam |
Compound for IT Log storage parameters. |
2525 |
ITLogTopologySelection |
The type of topology. |
2538 |
ITLogUseGroup |
Determines whether the group hierarchy is reflected in the resulting KPI Model. |
2838 |
IconSelection |
Configure the icon that is displayed for this object. |
1123 |
IncludeIncomplete |
Include unfinished Batch Production Records in "Ended in Time" queries. This may make the queries slower. |
6736 |
IncludeSubdirs |
If switched on all subdirectories will be traversed recursively. |
6498 |
Info |
Additional relevant information (can be hyperlinked). |
1978 |
InfoDescription |
If the Info field is a hyperlinked value, then this will be the tooltip or mouseover text for the link. If only a URL is used, then this will be the text displayed in Info. |
1979 |
InfoDisplayFormat |
Info display format. |
2047 |
InfoNumericFormat |
The numeric formatting code (.NET) used to modify how numbers are displayed. |
2045 |
InfoUOM |
Unit of measure for the info value (applicable if value is numeric). |
1980 |
InfoURL |
URL link for the Info field (creates a hyperlink in the Info field). |
1981 |
InfrastructureGracePeriod |
The timespan after which an infrastructure failure is reported as communication error. |
5332 |
InheritAuditTrailStrategy |
Inherit parent object's audit trail types in addition to the ones enabled on this object. |
11798 |
InmationProfileCredentials |
|
202 |
InputConversion |
Contains the options to convert input and output data to and from the IO Item. |
2446 |
InterfaceType |
Interface Type. |
229 |
InterfaceTypeString |
Interface Type String. |
230 |
InternalTerminationSignal |
Signal that librdkafka will use to quickly terminate on rd_kafka_destroy(). If this signal is not set then there will be a delay before rd_kafka_wait_destroyed() returns true as internal threads are timing out their system calls. If this signal is set however the delay will be minimal. |
6646 |
InvocationDelay |
Defines a certain delay which is kept before executing data fetches for a particular start and end time (in case end time is near actual time). |
2835 |
IoSubsystemState |
Property compound for volatile runtime information about the state of the I/O subsystem in a connector component. |
1806 |
IoTimerThreadHeartbeat |
A heartbeat value which oscillates between 1 and 1000 (each second). |
1809 |
IoTimerThreadLastExecution |
The most recent execution of the timer thread (should be recent and ever-changing). |
1808 |
IoTimerThreadRuntime |
The runtime of the periodic timer thread in milliseconds. |
1807 |
IoType |
Item Type. |
907 |
IsLegacyMode |
If on, legacy production calendar will be used, otherwise the ISA-88 mode is used. |
5293 |
IsRelativeEnd |
Indicates if the Datetime end property is relative or not. |
2140 |
IsRelativeStart |
Indicates if the Datetime Start property is relative or not. |
2139 |
IsVendorSpecific |
Indicates whether the property is a deafult property according to the server endpoint type, or vendor-specific. |
172 |
Issuer |
Used as the issuer claim which identifies the principal (inmation Web API) that issued the JSON Web Token. |
2827 |
ItemAcquisitionStrategy |
Property compound for data acquisition strategy of data updates or non-eventing data (such as OPC DA item value subscriptions). |
152 |
ItemDataType |
The original data type of the OPC Item. |
587 |
ItemEvent |
Generic Event Receiver. |
646 |
ItemID |
The unique item identifier which has been configured in the external system. |
142 |
ItemInfoFirstFile |
Indicates the file name from which this item was first imported (created). |
1556 |
ItemInfoFirstTime |
Indicates the date and time when this item was first imported (created). |
1559 |
ItemInfoRecentFile |
Indicates the file name from which this item was recently importing data. |
1558 |
ItemInfoRecentTime |
Indicates the date and time when this item was recently importing data. |
1560 |
ItemInformation |
The Compound to pool OPC Server information for items. |
584 |
ItemScanRate |
The time period in which the OPC Server refreshes data from the device. |
588 |
ItemValue |
The current value of the object. |
86 |
ItemsPerNode |
Limits the maximum number of items browsed in a particular node. |
5339 |
JSONDumpFileParameter |
Parameter to save history data as JSON dump files. |
5326 |
JSONDumpFilePath |
The path where the connector service will save the JSON dump files. |
5325 |
KPIAboveTargetColor |
Color used for the bar if the bar value is greater than or equal to (>=) the target. Must have conditional coloring set to True. |
1956 |
KPIAboveTargetName |
Name used in the legend for bars with a value greater than or equal to (>=) the Target. Must have conditional coloring set to True. |
1957 |
KPIActualColumnDisplayName |
Overrides the default actual column name (header) for KPIs in this group. |
2104 |
KPIActualTrendType |
The trend line type for the actual pen on a KPI trend. |
2036 |
KPIAdditionalText |
Additional Text. |
2481 |
KPIAlertTemplate |
The template that controls alert behavior for this KPI. |
2037 |
KPIAutoUpdate |
Boolean (True/False) that determines if background site updates will also cause the embedded content frame to be reloaded. |
5365 |
KPIBackfillDays |
The maximum number of days per status history backfill cycle that data will be populated (use a smaller number for fast moving data). |
11858 |
KPIBar |
String property containing full instance path to the bar value for the bar chart. |
2020 |
KPIBarChartID |
The Bar Chart ID which gets assigned by VisualKPI. |
2005 |
KPIBarChartSettings |
Bar Chart Settings. |
2024 |
KPIBarChartSortOrder |
The selected bar sort order. |
2840 |
KPIBarColor |
The display color of the bar in the chart. |
2022 |
KPIBarName |
The name of the bar in the chart that will appear to your users. Longer names may be truncated on small devices, so consider short names. |
2021 |
KPIBarOffset |
Relative time offset used to get values for the object. This allows the chart to show values at different times such as Profit Today and Profit Last Week. This value uses our standard offset format (e.g. *-1day). |
2023 |
KPIBarSettings |
Settings for a bar in the bar chart. A maximum of 20 can be propagated to VisualKPI. |
2019 |
KPIBaseline |
Baseline value for the Bar Chart. |
1965 |
KPIBaselineColor |
Baseline color. |
1966 |
KPIBaselineName |
Name of the baseline in the bar chart. |
2025 |
KPIBelowTargetColor |
Color used for the bar if the bar value is less than (<) the target. Must have conditional coloring set to True. |
1958 |
KPIBelowTargetName |
Name used in the legend for bars with a value greater than or equal to (>=) the target. Must have conditional coloring set to True. |
1959 |
KPIBottomText |
The value displayed on the bottom line of a KPI Block in a Group Map or a KPI Map -- if blank, then the default setting of Actual will be used. |
2038 |
KPIBulletChartType |
Controls the display type for Bullet Charts. Deviation types require a KPI Target. |
2039 |
KPICalculationType |
Override for how non-numeric values in calculations are handled. This is useful when dealing with exception data (i.e., BadValue) returned from calculation-derived data sources. |
1968 |
KPICenterline |
Override of center line value used to determine SPC rule violations for SPC KPIs. |
2040 |
KPIChartOrientation |
The selected chart orientation. |
2839 |
KPIChartSettings |
Chart format settings. |
2017 |
KPIChartTime |
Overrides the default chart time for the chart. This value can be either an actual or relative date (e.g. 6/12/2015 or *-7Days). |
1970 |
KPIColumnDisplayOptions |
Compound holding the column display options for the KPI visualization. |
1854 |
KPIConditionalColoring |
A setting of True will color the bars in either the Above target color or the Below target color based on how the bar value compares to the target. A setting of False will use the configured bar colors. |
1971 |
KPIConfiguration |
Configuration of the KPIs. |
2848 |
KPIContact |
The main contact for the object chosen from the collection defined in the contact tab (can be one or more people). It appears in object details and is used in notifications. |
1972 |
KPIContentURL |
URL of the content to be displayed. |
2398 |
KPIConvertTimeStamps |
Convert time stamp to local client time. |
3008 |
KPIDatabaseTimezone |
The time zone setting for the database you are querying. |
3012 |
KPIDateFormat |
Date Format. |
2886 |
KPIEmbeddedContentID |
The ID which gets assigned by VisualKPI. |
2888 |
KPIEndTime |
Overrides the default End Time for the Chart (Note: The End time must be > the Start time and the value can be an actual or relative date [e.g. 6/12/2015 or *-7Days]). |
1975 |
KPIGeoLabelFormat |
Overrides what is displayed for an object on a geo Map. |
2041 |
KPIGroupGeoLabelFormat |
Overrides what is displayed for an object on a geo map. |
1858 |
KPIGroupInfoSettings |
Group info settings. |
2142 |
KPIGroupMapExpansion |
Group Map expansion. |
2147 |
KPIGroupMapHeaderPriority |
Group Map header priority. |
2146 |
KPIGroupMapKPICellCount |
Group Map KPI cell count. |
2145 |
KPIGroupMapPosition |
The numerical location (left to right, top to bottom) of the KPI in a Group Map. If this is blank, then the KPI will not be shown in the Group Map. |
2042 |
KPIGroupMapSettings |
Group Map settings. |
2144 |
KPIGroupSettings |
Compound holding the group options for the KPI visualization. |
1850 |
KPIID |
The KPI ID which gets assigned by VisualKPI. |
1954 |
KPIInfoColumnDisplayName |
Overwrite the name of the info display. |
1864 |
KPIInfoSettings |
Info settings. |
2048 |
KPIIsSPC |
Determines if KPI status and trend are SPC-based. If set to true, then status calculations are based on the worst case status from the violated SPC rules. |
2097 |
KPILCL |
The Lower Control Limit value used to determine SPC rule violations for SPC KPIs. |
2087 |
KPILimitCalcEnd |
Limit calc end. |
2049 |
KPILimitCalcEndDate |
Limit calc end date. |
2050 |
KPILimitCalcEndTime |
Limit calc end time. |
2051 |
KPILimitCalcStart |
Limit calc start. |
2052 |
KPILimitCalcStartDate |
Limit calc start date. |
2053 |
KPILimitCalcStartTime |
Limit calc start time. |
2054 |
KPILimitTrendType |
Limit trend type. |
2055 |
KPILine |
Line value for the bar chart. |
2028 |
KPILineColor |
Display color of the line in the bar chart. |
2029 |
KPILineName |
Name of the Line in the Bar Chart. |
2030 |
KPILineSettings |
Settings for the lines in the chart. |
2031 |
KPIMaxYAxis |
Override for maximum of chart scale on the y-axis. |
2057 |
KPIMinYAxis |
Override for minimum of chart scale on the y-axis. |
2058 |
KPIModel |
Compound for KPI-Model definitions. |
3076 |
KPINameClickPath |
Controls what happens when a user clicks the name of a KPI. The user will either be shown the trend of the KPI (default) or the user will be taken to the first link defined for the KPI (if one exists). |
2072 |
KPIOffset |
The relative time offset used to retrieve values for this KPI. This allows for KPIs to show values at different times, such as Profit Today, Profit Yesterday, and Profit Last Week. This value uses our standard offset format (e.g., *-1day). |
1793 |
KPIParetoChartID |
The Pareto Chart ID which gets assigned by VisualKPI. |
2100 |
KPIPen |
String property containing full instance path to the pen value for the chart. |
1995 |
KPIPenColor |
The display color of the pen in the chart. |
2002 |
KPIPenMaxYAxis |
Override for maximum of chart scale on the y-axis. |
1989 |
KPIPenMinYAxis |
Override for minimum of chart scale on the y-axis. |
1990 |
KPIPenName |
The name of the pen in the chart that will appear to your users. Longer names may be truncated on small devices, so consider short names. |
2000 |
KPIPenOffset |
Relative time offset used to get values for the object. This allows the Chart to show values at different times such as Profit Today and Profit Last Week. This value uses our standard offset format (e.g. *-1day). |
1996 |
KPIPenSettings |
Settings for a pen in the chart. A maximum of 20 can be propagated to VisualKPI. |
1994 |
KPIPenTrendType |
The trend line type for the trend pen. |
2008 |
KPIPieChartID |
The pie chart ID which gets assigned by VisualKPI. |
2101 |
KPIPlotYAxis |
The plot of the y axis. |
2103 |
KPISPCLimitCalcEndTime |
The end time that is used to calculate the limits and mean for the SPC KPI (Note: end time must be greater than the start time and the value can be an actual or a relative date [e.g., 6/12/2015 or *-7Days]). |
2086 |
KPISPCLimitCalcStartTime |
The start time that is used to calculate the limits and mean for the SPC KPI (Note: Start time must be smaller than the end time and the value can be an actual or relative date [e.g., 6/12/2015 or *-7Days]). |
2084 |
KPISQLConnectionString |
A string that specifies information about a data source and the means of connecting to it. It is passed to an underlying driver or provider in order to initiate the connection to a database. |
2467 |
KPISQLQuery |
Query. |
2468 |
KPISQLQueryDateFormat |
Date format. |
2479 |
KPISQLQueryDelimiter |
Query delimiter. |
2478 |
KPISQLQueryTimeFormat |
Time format. |
2480 |
KPIScrollInterval |
Interval used when scrolling the corresponding table widget. |
3009 |
KPIScrollIntervalUOM |
UOM of scroll interval. |
3011 |
KPIShowAverageTrendline |
A boolean value used to set visibility of a line depicting the average of the actual trend data within the trend timeframe. |
2073 |
KPIShowStatusBackground |
The default setting to show or hide status bar in the background of a KPI trend. |
5357 |
KPISliceSettings |
Slice settings. |
2192 |
KPISparklineRefreshInterval |
Update period for the sparkline in seconds. Leave blank for the default value. |
2878 |
KPIStaleAge |
The maximum age in minutes of a KPIs Actual value. When Current Time is greater than (Last Actual value update time plus KPI Stale Age), then KPI status is set to Stale. A value 0 will ignore Staleness for this KPI. |
6707 |
KPIStartTime |
Overrides the default start time for the chart (note: the start time must be < the end time and the value can be an actual or relative date [e.g., 6/12/2015 or *-7Days]). |
1973 |
KPIStatus |
Override of status. Usually determined by actual and limit values. |
2059 |
KPIStatusCalcSampleCount |
The number of points used to determine status for SPC KPIs. This value must be equal to, or greater than, the number of points required for each selected WE Rule. |
2083 |
KPIStatusHistoryType |
Definition determing how to calculate status history. |
11857 |
KPITableContextPath |
Definition of the context path for the VisualKPI fetchLuaTableData request. If not set, the path /System will be used. |
11876 |
KPITableID |
The ID which gets assigned by VisualKPI. |
2889 |
KPITableModuleName |
The module name of the library that will be used for the fetchLuaTableData function. If not set the library inmation.visualkpi will be used. |
11875 |
KPITableSQLParameter |
List of dynamic SQL query parameters. |
2643 |
KPITableSQLParameter1 |
Parameter 1. |
2644 |
KPITableSQLParameter10 |
Parameter 10. |
2655 |
KPITableSQLParameter2 |
Parameter 2. |
2646 |
KPITableSQLParameter3 |
Parameter 3. |
2648 |
KPITableSQLParameter4 |
Parameter 4. |
2649 |
KPITableSQLParameter5 |
Parameter 5. |
2650 |
KPITableSQLParameter6 |
Parameter 6. |
2651 |
KPITableSQLParameter7 |
Parameter 7. |
2652 |
KPITableSQLParameter8 |
Parameter 8. |
2653 |
KPITableSQLParameter9 |
Parameter 9. |
2654 |
KPITableTypeSelection |
Table type selection. |
2471 |
KPITargetColor |
Display color of the target line in the bar chart. |
1960 |
KPITargetColumnDisplayName |
Overwrite the name of the KPI target display. |
1860 |
KPITargetName |
Name of the target line in the bar chart. |
1961 |
KPITargetShow |
Sets the visibility of the target line on the bar chart. A setting of False will suppress the display of the target line to the users but can still be used with conditional coloring. |
1962 |
KPITargetTrendType |
The trend line type for the target pen on a KPI trend. |
2060 |
KPITimeFormat |
Time format. |
2887 |
KPITimeInState |
The numerical override for the time in state (overrides alert template setting). This is the delay, in minutes, before status is used to determine if notifications are sent. This helps to prevent nuisance notifications for rapidly-changing KPIs. |
2062 |
KPITopText |
The value displayed on the top line of a KPI Block in a Group Map or a KPI Map. If blank, then the default setting of KPI name will be used. |
2063 |
KPITrendEnd |
Overrides the default end time for the KPI trend (Note: The end time must be > the start time and the value can be an actual or relative date [e.g., 6/12/2015 or *-7Days]). |
2066 |
KPITrendID |
The trend ID which gets assigned by VisualKPI. |
2006 |
KPITrendLimits |
The default setting to show or hide the limit pens on a KPI trend. Users can still show pens by clicking in the legend. |
2071 |
KPITrendScale |
The trend scale type for the KPI or trend. |
1991 |
KPITrendSettings |
Trend settings. |
2061 |
KPITrendStart |
Overrides the default start time for the KPI trend (Note: The start time must be < the end time and the value can be an actual or relative date [e.g., 6/12/2015 or *-7Days]). |
2069 |
KPITrendTarget |
The default setting to show or hide the target pen on a KPI trend. Users can still show the target pen by clicking on the legend. |
2070 |
KPITrendYAxis |
The trend y-axis scale type for the KPI or trend. |
1992 |
KPIUCL |
The upper control limit value used to determine SPC rule violations for SPC KPIs. |
2090 |
KPIWERule1 |
Determines KPI Status when Western Electric Rule 1 (any single data point falls outside the 3σ limit from the centerline) is triggered. |
2077 |
KPIWERule2 |
Determines KPI Status when Western Electric Rule 2 (two out of three consecutive points fall beyond the 2σ limit on the same side of the centerline) is triggered. |
2079 |
KPIWERule3 |
Determines KPI Status when Western Electric Rule 3 (four out of five consecutive points fall beyond the 1σ limit on the same side of the centerline) is triggered. Click on the header for more information. |
2080 |
KPIWERule4 |
Determines KPI Status when Western Electric Rule 4 (nine consecutive points fall on the same side of the centerline ) is triggered. Click on the header for more information. |
2082 |
KPIXAxisLabel |
The label that will be displayed on the x-axis of the chart. |
1986 |
KPIXYPlotID |
The xy plot ID which gets assigned by VisualKPI. |
2102 |
KPIXYPlotPenSettings |
Settings for a pen in the xy plot. A maximum of 20 can be propagated to VisualKPI. |
2186 |
KPIYAxisLabel |
The label that will be displayed on the y-axis of the chart. |
1987 |
KafkaClientId |
Client identifier. |
6604 |
KafkaOffset |
The records in the partitions are each assigned a sequential id number called the offset that uniquely identifies each record within the partition. |
6540 |
KafkaPartition |
Each partition is an ordered, immutable sequence of records that is continually appended to - a structured commit log. |
6539 |
KafkaProducerParameters |
The parameters for the Kafka Producer protocol. |
6537 |
KafkaTopic |
A topic is a category or feed name to which records are published. Topics in Kafka are always multi-subscriber; that is, a topic can have zero, one, or many consumers that subscribe to the data written to it. |
6538 |
KeepAliveInterval |
The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time. |
6554 |
KeepOpen |
If switched on the database connection will be kept open in between calls. |
6455 |
KpiAlertPrimaryContact |
Main contact for KPI notifications. |
948 |
KpiAlertSecondaryContact1 |
Alternate contact 1 for KPI notifications. |
950 |
KpiAlertSecondaryContact2 |
Alternate contact 2 for KPI notifications. |
951 |
KpiAlertSilence |
KPI alert silencing switch. |
945 |
KpiAlertSilenceDuration |
The numerical override for the alert silence duration (overrides alert template setting). Only valid if the alert silence is True. |
947 |
KpiAuthenticationMethod |
VKPI Authentication Method (Anonymous, Integrated, Basic, Digest). |
1169 |
KpiDisplaySettings |
Compound holding the specific display settings for the KPI visualization. |
944 |
KpiGroupSelectionQueries |
KPI queries to select the sub-groups of a group, based on their attributes. E.g. all groups where 'Region' equals 'Region NE'. |
1083 |
KpiGroupSelectionQuery |
Dynamically determines what sub-groups will appear in this group based on their attributes. E.g. All groups where 'Region' equals 'Region NE'. |
1079 |
KpiH |
Limit value for the KPI which is used in KPI status calculations. |
925 |
KpiHH |
Limit value for the KPI which is used in KPI status calculations. |
926 |
KpiHHH |
Limit value for the KPI which is used in KPI status calculations. |
927 |
KpiHHHPath |
Dynamic limit value for the KPI which is used in KPI status calculations. |
10772 |
KpiHHPath |
Dynamic limit value for the KPI which is used in KPI status calculations. |
10771 |
KpiHPath |
Dynamic limit value for the KPI which is used in KPI status calculations. |
10770 |
KpiInService |
Show this KPI as 'in service' in the VisualKPI web displays. |
956 |
KpiInterfaceAllowWrites |
General switch to allow write-backs. |
1093 |
KpiInterfaceBatchSize |
Tuning feature; how many elements to fetch concurrently from the source ; default = 5000. |
1096 |
KpiInterfaceDownSampleTrendData |
General switch to optimize the network transport (client pixels vs. Data points from the source). |
1094 |
KpiInterfaceEnabled |
General switch to switch off unused or faulty interfaces. |
1095 |
KpiInterfaceErrorDisplay |
Error display. |
1151 |
KpiInterfaceID |
VKPI Interface GUID. |
1152 |
KpiInterfaceName |
Logical name for the interface. |
1091 |
KpiInterfaceWriteGroup |
AD or local group the user is required to belong to in order to execute writes. |
1146 |
KpiL |
Limit value for the KPI which is used in KPI status calculations. |
924 |
KpiLL |
Limit value for the KPI which is used in KPI status calculations. |
923 |
KpiLLL |
Limit value for the KPI which is used in KPI status calculations. |
922 |
KpiLLLPath |
Dynamic limit value for the KPI which is used in KPI status calculations. |
9768 |
KpiLLPath |
Dynamic limit value for the KPI which is used in KPI status calculations. |
10768 |
KpiLPath |
Dynamic limit value for the KPI which is used in KPI status calculations. |
10769 |
KpiLimits |
This property compound lets you define the range, the target and the limits for this KPI definition. |
928 |
KpiMax |
Highest valid value for the KPI. Values above this value will result in an unknown status. |
931 |
KpiMaxPath |
Highest valid value for the KPI (dynamic). Values above this value will result in an unknown status. |
10775 |
KpiMin |
Lowest valid value for the KPI. Values below this value will result in an unknown status. |
930 |
KpiMinPath |
Lowest valid value for the KPI (dynamic). Values below this value will result in an unknown status. |
10774 |
KpiNotificationSettings |
This property compound lets you define the notification settings for this KPI definition. |
954 |
KpiNotificationType |
The means of notification this KPI will use in case of alerts. |
952 |
KpiReferenceCount |
KPI-Interfaces and KPI-Attributes. Number of individual data elements (RO). |
1092 |
KpiSelectionQuery |
Dynamically determines what KPIs will appear in this group based on their attributes. E.g. all KPIs where 'Region' equals 'Region NE'. |
1080 |
KpiShow |
Hide/show KPI. A setting of False will suppress the display of the object to the users in the VisualKPI web display. |
955 |
KpiTarget |
The KPI's desired target value. |
929 |
KpiTargetPath |
The KPI's dynamic target value. |
10773 |
LastError |
The last error, which occurred in this object. |
6449 |
LastErrorTime |
The time of the last error, which occurred in this object. |
6450 |
LastExecutionUtc |
Last execution time displayed in UTC. |
5369 |
LastResult |
Result of last execution. |
5368 |
LatencyTimeout |
The Latency Timeout can be used to detect server endpoint malfunctions, which might happen in specific products (such as OPC DA Servers) and usually result in 'stale' values. |
150 |
Latitude |
The north-south position of a point on the Earth's surface. |
44 |
LaunchReconnect |
Instructs the object to reconnect if the alarm is raised. |
575 |
LdapDirectoryDomainCredentialsPassword |
The password used to connect to the Active Directory (AD). If the username and password parameters are both null, the credentials of the user which acquires an access token are used to connect to the AD. |
2833 |
LdapDirectoryDomainCredentialsUserName |
The username used to connect to the Active Directory (AD). If the username and password parameters are both null, the credentials of the user which acquires an access token are used to connect to the AD. |
2832 |
LdapDirectoryQueryRoot |
The container on the Active Directory to use as the root for validating users and to query for the groups a user is member of. |
2829 |
LifecycleManagement |
Lifecycle Management. |
5345 |
LimitH |
Limit H. |
2768 |
LimitHH |
Limit HH. |
2767 |
LimitHHH |
Limit HHH. |
2766 |
LimitL |
Limit L. |
2763 |
LimitLL |
Limit LL. |
2764 |
LimitLLL |
Limit LLL. |
2765 |
Limits |
Define limits for EU range and alarming. |
422 |
LimitsExtended |
Define limits for extended range and alarming. |
2760 |
LinkDescription |
List of associated Link or URL descriptions (semicolon separated, limit 10) for the object. These are used to both shorten and give better meaning to links (e.g., instead of www.xyz.com?x=5&type=2, the user could see SOPs or Shift Report). |
2012 |
LinkInfoDisplayName |
Overwrite the name of the link information. |
1872 |
Links |
List of associated links or URLs (semicolon separated, limit 10) for the object. |
2011 |
ListenerPort |
Component listener (server) port for core service communication in Communication Mode = Passiv. |
213 |
LocalFolder |
Local Folder. |
31 |
LocalMode |
If checked the object expects commands directly from another object in the same component. Otherwise the commands are expected to be committed from a DBDispatcherItem in the core component. |
3063 |
LocalPort |
This port number can optionally be used in Communication Mode = Active for local port presets (if set to 0 (default), which is the default, a random high port will be used). |
196 |
LocalTime |
If this option is switched on timestamps will be exported as local time. This has only an effect if the timestamps are exported in ISO8601-format. |
4131 |
Location |
The location of the object. |
43 |
LocationName |
The optional name of a location. |
197 |
LocationStrategy |
Definition of the location strategy. |
261 |
LocationTracking |
Enables historization of Location data. |
258 |
LogRetentionDays |
This value specifies the number of days the system will keep general log entries available for analysis. |
306 |
Longitude |
The east-west position of a point on the Earth's surface. |
45 |
LookupTextLength |
The numerical override for the maximum length of lookup text displayed on chart cursors. |
1983 |
LuaModuleMandatoryExecution |
Execute the script library when initializing the Lua environment for child objects. |
1799 |
LuaModuleName |
The Lua module name of the library that will be used to reference the library by its users. |
1186 |
LuaModuleSyncMode |
Sync mode of Lua module. |
2424 |
MainProduct |
Allows to reclassify products to be the main product. |
6575 |
MaintainProcessImage |
Switches the general process image feature on or off. |
453 |
MarkerStyle |
Select the marker style. |
12035 |
MatchedFiles |
The table with the recent matched files. |
6510 |
MaterialLotQuantity |
The quantity of the material lot. |
750 |
MaterialLotStatus |
Status of the material lot. For example, released, approved, blocked, in process, in quality check. |
747 |
MaterialLotStorageLocation |
An identification of the storage location or a physical location of the material lot. Examples: Work Center 1, Maintenace Shed 4S, Work Bench 10 Top Shelf, Warehouse 1. |
748 |
MaxGroupNumber |
The maximun number of groups. |
502 |
MaxInFlightRequestsPerConnection |
Maximum number of in-flight requests per broker connection. This is a generic property applied to all broker communication, however it is primarily relevant to produce requests. In particular, note that other mechanisms limit the number of outstanding consumer fetch request per broker to one. |
6608 |
MaxItemsPerGroup |
The maximun number of Items which will be assigned to a group. |
499 |
MaxMode |
The mode of the maximum range of the axis. |
11994 |
MaxValue |
The maximum range value of the axis. |
11991 |
MaximumConnections |
Specifies the maximum number of physical connections that can be created in the connection pool. |
2817 |
MaximumDepth |
The maximum number of days of the batch history. |
3057 |
MeasureUnit |
The unit of measure of the associated property value or test result if applicable. |
746 |
MemorySize |
The memory size. |
56 |
MessageCopyMaxBytes |
Maximum size for message to be copied to buffer. Messages larger than this will be passed by reference (zero-copy) at the expense of larger iovecs. |
6606 |
MessageMaxBytes |
Maximum Kafka protocol request message size. |
6605 |
MessageMaxSize |
Maximum size per message after splitting. |
12119 |
MessageSendMaxRetries |
How many times to retry sending a failing Message. Note: retrying may cause reordering unless .EnableIdempotence is set to true. |
6686 |
MessageTimeoutMs |
Local message timeout. This value is only enforced locally and limits the time a produced message waits for successful delivery. A time of 0 is infinite. This is the maximum time librdkafka may use to deliver a message (including retries). Delivery error occurs when either the retry count or the message timeout are exceeded. |
6698 |
MetadataMaxAgeMs |
Metadata cache max age. Defaults to topic.metadata.refresh.interval.ms * 3. |
6612 |
MetadataRequestTimeoutMs |
Non-topic request timeout in milliseconds. This is for metadata requests, etc. |
6610 |
Milliseconds |
Shows the overall runtime of the most recent run. |
2802 |
MinMode |
The mode of the minimum range of the axis. |
11993 |
MinValue |
The minimum range value of the axis. |
11990 |
MinimumConnections |
Specifies the minimum number of physical connections to maintain in the connection pool. |
2818 |
ModelLockGranularity |
This parameter instructs the Model Manager how many model instances shall share a single lock object. |
41 |
ModelPropertyDataList |
Choose properties for selected class. |
2143 |
ModelScopeRaw |
Model Scope configuration setting. |
1062 |
MongoDBConnection |
This property compound combines the properties of the MongoDB Connection e.g. the connection strings to the mongoDB. |
244 |
MongoDBUri |
If not empty, the MongoDB URI takes precedence, overriding all other MongoDB connection settings. The string needs to be URL-encoded. |
6529 |
MongoDbAllowInvalidCertificates |
Allow invalid server certificates for TLS connections. |
5363 |
MongoDbAllowInvalidHostnames |
Allow invalid hostnames in the server certificate for TLS connections. |
5362 |
MongoDbAuthenticationMode |
Authentication mode to be used connecting the MongoDB instance. |
343 |
MongoDbUseCompression |
Compress MongoDB data on the wire. |
5360 |
MongoDbUseTLS |
Enable TLS for MongoDB connections. |
5361 |
MonitoringPeriod |
The time period which is monitored to determine a sustained drop of the item update rate as a missing vital sign of the object. |
570 |
MqttClientId |
String to use as the client id. If NULL, a random client id will be generated. If id is NULL, .CleanSession must be true. |
6552 |
MqttParameters |
The MQTT client configuration parameters. |
6563 |
MqttPassword |
The password to send as a string. Set to NULL in order to send just the username. |
6721 |
MqttQualityOfService |
The agreement between the sender of a message and the receiver of a message that defines the guarantee of delivery for a specific message. |
6727 |
MqttRetain |
Sets the retained flag to true. The broker stores the last retained message and the corresponding QoS for that topic. |
6729 |
MqttTopic |
String that the broker uses to filter messages for each connected client. |
6726 |
MqttUsername |
The username to send as a string, or NULL to disable authentication. |
6719 |
Name |
The name of this group. |
16 |
NamespaceQueryOptions |
Options to configure Report Designer datasource Namespace. |
2128 |
NextActivationLocal |
Indicates next scheduler activation in local time format. |
2752 |
NextActivationUTC |
Indicates next scheduler activation in UTC time format. |
2751 |
NextExecutionUtc |
Next execution time displayed in UTC. |
5370 |
NodeType |
Selector property to select datasource specific node-item. |
1833 |
NonUniqueID |
If this item is not unique in the configuration of the OPC Server this flag is set. |
595 |
NumFormat |
Optional numeric formatting code (.NET) used to modify how numbers are displayed in VKPI. |
940 |
NumberOfIntervals |
Determine number of intervals. |
2333 |
NumberPrecision |
Specifies the significant decimal digits for numbers. |
4141 |
NumericDtFunction |
Select the numeric date and time function to supply the values for the object. |
426 |
NumericFunction |
Select the numeric function. |
368 |
ODBCConnection |
The ODBC connection parameters. |
2789 |
ODBCDatasource |
The name of the ODBC datasource, which can be a DSN or a valid ODBC connection string (example: "driver={SQL Server Native Client 11.0}; server=someserver;uid=someuser;pwd=somepassword;"). The parameters of the connection string are defined by the used driver, which is identified by the DRIVER parameter. More information can be found here https://docs.microsoft.com/en-us/sql/odbc/reference/syntax/sqldriverconnect-function and https://www.connectionstrings.com. |
2542 |
ODBCDiagnostics |
A set of diagnostic properties. |
6445 |
ODBCName |
The name of the ODBC connection. |
6456 |
ODBCPassword |
The password of the ODBC Datasource (optional). |
2547 |
ODBCStatistics |
Shows statistics of the current ODBC connection. |
6461 |
ODBCUsername |
The user name of the ODBC Datasource (optional). |
2543 |
OPCComCRuntimeInformation |
OPC Server Runtime Information. |
519 |
OPCComVServers |
OPC COM Virtual Server Configurations. |
1713 |
OPCInterfacesDA10 |
OPC Server Interface DA 1.0. |
512 |
OPCInterfacesDA20 |
OPC Server Interface DA 2.0. |
513 |
OPCInterfacesDA30 |
OPC Server Interface DA 3.0. |
514 |
ObjCfgVersion |
The configuration version of the object. |
12069 |
ObjClassVersion |
Class Version of the object. |
12070 |
ObjCreatedBy |
The entity which created the object. |
12072 |
ObjCreatedTime |
The time at which the object was created. |
12071 |
ObjModifiedBy |
The entity which modified the object. |
12074 |
ObjModifiedTime |
The time at which the object was modified. |
12073 |
ObjNumid |
Numeric ID of the object. |
12103 |
ObjPath |
The path to the object. |
12077 |
ObjSysName |
System Name of the object. |
12078 |
ObjTextId |
Text ID of the object. |
12079 |
ObjType |
Type of the object. |
12080 |
ObjectConfiguration |
Configuration of transfer blocks based on historizing inmation objects. |
4101 |
ObjectDescription |
This is the user-modifiable object description. This name overrides the description which has been supplied by the external system. |
198 |
ObjectMaturity |
This selection classifies the productive state of the object. It can be used in conjunction with catalogue functions in order to identify specific objects in respect to their maturity state. |
5343 |
ObjectName |
The user-modifiable object name. This name overrides the name which has been supplied by the external system. It must be unique within the collection of objects of the parent object. |
1 |
OldestBatchID |
The oldest Batch ID, which has been acquired by the datasource. |
3058 |
OmitMilliseconds |
Milliseconds are omitted from timestamp exports. |
4132 |
OpcAeAvailableFilters |
This read-only option group reflects the supported event filters as defined by the OPC A&E server. |
641 |
OpcAeFilterOptions |
This property group holds all settings to be used for server-side filtering. |
645 |
OpcAeRedundancyInvestigationMask |
The flag mask which indicates the strategy for OPC classic-born alarm & event redundancy resolution. |
709 |
OpcAeServerCapabilities |
Information about an OPC A&E Server and its capabilities. |
640 |
OpcComApplication |
The Name of the application as registerd by the OPC Server. |
460 |
OpcComBinary |
Binary. |
466 |
OpcComBitModel |
The software architecture of the external OPC Server. |
467 |
OpcComCCharacteristics |
COM Characteristics. |
473 |
OpcComCClientOptions |
Options which our client may apply to work-around improper OPC DA Server implementations. |
495 |
OpcComCGroupOptions |
Options which our client may apply to work-around improper OPC DA Server implementations with respect to Server Groups. |
497 |
OpcComCInterfaces |
OPC COM Interfaces. |
472 |
OpcComCServerInfo |
OPC Server Registration Data. |
455 |
OpcComCStateInformation |
This information is provided by the OPC server. |
544 |
OpcComIFDataTypes |
OPC COM Interface Information Types. |
477 |
OpcComIFInterfaces |
OPC COM Interface Types. |
478 |
OpcComIFVersions |
OPC COM Interface Versions. |
480 |
OpcComRunAsUser |
Run as User. |
468 |
OpcComSVCParams |
The OPC Server service parameters. |
469 |
OpcComServerReadOnly |
This switch prevents any users of the OPC DA, A&E and HDA Servers to issue any write-backs to the connected inmation system and the connected external servers. It supersedes any other security settings. |
1945 |
OpcComServerSettings |
OPC COM server specific settings. |
2180 |
OpcComThreadingModel |
The OPC Server threading model. |
470 |
OpcComUserIDOverride |
OPC COM Server user identity override. |
1716 |
OpcComVIProgID |
The version independent ProgID of the application as registerd by the OPC Server. |
465 |
OpcComVendor |
Vendor information as registerd by the OPC Server. |
458 |
OpcComVersion |
The version of the application as registerd by the OPC Server. |
461 |
OpcComWebsite |
Website information as registerd by the OPC Server. |
459 |
OpcDAClientGroupOptions |
Options which our client may apply to work-around improper OPC DA Server implementations with respect to Server Groups. |
498 |
OpcDaGroup |
The OPC client group. |
251 |
OpcEnforceDa20Write |
Enforce write as defined by the OPC DA 2.0 specification. |
1056 |
OpcEngUnit |
The Engineering Unit or unit of measurement is a definite magnitude of a physical quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same physical quantity. |
397 |
OpcHdaInsertReplaceMode |
Defines how historical insert and replace operations are handled by the OPC server. |
2419 |
OpcItemDescription |
Item Description Text. |
394 |
OpcLimitHigh |
Alarming high limit. |
407 |
OpcLimitLow |
Alarming low limit. |
405 |
OpcPackDelay |
OPC write pack delay. |
1053 |
OpcRangeHigh |
High EU Range. |
402 |
OpcRangeLow |
Low EU Range. |
400 |
OpcServerGraceAddItemsBatchSize |
Maximum number of items per Add Items call during subscription. If the value is set to 0, the number of items per Add Items call is unlimited. |
5173 |
OpcServerGraceAddItemsDelay |
Delay between successive AddItems calls during subscription. |
5177 |
OpcServerGraceAddItemsDisableRetry |
Disable retrying the AddItems calls for previously failed registrations. |
5222 |
OpcServerGraceConnectActual |
Actual pause indicator (shows remaining pause time). |
2197 |
OpcServerGraceConnectPause |
Pause after the COM connection (CoCreateInstanceEx call) and let the server sort itself. The maximum pause is 60 seconds. |
2196 |
OpcServerGraceSettings |
Grace settings to adapt to server specific behaviour. Such settings can and should only be used, in case a particular server does not conform to standard behaviour with respect to the OPC specifications. |
2195 |
OpcServerGraceWriteIgnoreQuality |
Do not specify quality while issuing DA write calls. |
5358 |
OpcServerGraceWriteIgnoreTimestamp |
Do not specify timestamp while issuing OPC write calls. |
5359 |
OpcServerIncompatibilities |
OPC Server Incompatibility Findings. |
516 |
OpcServerMiscellanous |
Miscellanous Settings. |
565 |
OpcServerPingPeriod |
The time period in seconds which will be used to ping the OPC Server for a status update. |
563 |
OpcServerPingTolerance |
The number of failed pings after which the datasource will be disconnected. |
5350 |
OpcUaADApplicationName |
Descriptive name of the application. |
971 |
OpcUaAlwaysAcceptServerCertificate |
If this property is set then the UA Server certificate will be checked and imported to the folder containing trusted certificates. If importing fails then certificate will be copied to the folder containing rejected certificates. If this this property is not set then certificate will be always copied to the folder containing rejected certificates. |
1760 |
OpcUaBrowseControlDataSource |
The browse settings for OPC UA Server data source. |
637 |
OpcUaBrowseNameNamespace |
The namespace index of the Browse Name. |
1821 |
OpcUaBrowseNameText |
Browse name of the node. |
1820 |
OpcUaCClientOptions |
The OPC UA Client Options. |
635 |
OpcUaCertificateDomainName |
Domain name for which the certificate is valid. |
1728 |
OpcUaCertificateDomainNames |
Defines the list of domain names for which certificate is valid. |
1725 |
OpcUaCertificateLifetime |
Defines how long the cerificate is valid. |
1729 |
OpcUaCertificateSecurity |
Defines settings for processing of certificates. |
1829 |
OpcUaClientCertificate |
Content of the UA Client certificate. |
1823 |
OpcUaClientUserName |
UA client user name. |
1755 |
OpcUaClientUserPassword |
UA client user password. |
1757 |
OpcUaConnectorOptions |
Settings which impact all stack-wise OPC UA client connections for this connector instance. |
1706 |
OpcUaCreateCertificate |
Create self signed certificate if it does not exist. |
1719 |
OpcUaCreateSubscriptions |
If this property is not set then subscriptions will be not created. |
1877 |
OpcUaDataChangeFilterOptions |
Parameters for the UA monitored item datachange filter. |
1214 |
OpcUaDeadbandAbsolute |
The absolute deadband. |
1040 |
OpcUaDeadbandPercent |
The percent deadband. |
1039 |
OpcUaDeadbandType |
Defines a server based deadband with absolute or percentual value. Deadband settings will be ignored for non-numeric items. |
1021 |
OpcUaDebugOptions |
Debug options for an OPC UA Datasource. |
1216 |
OpcUaDirectEndpoint |
Defines direct endpoint parameters. |
1828 |
OpcUaDiscardOldest |
Defines strategy for monitored item server queue. |
1025 |
OpcUaDiscoverEndpoints |
If discover endpoints is deselected, URL will be used to directly connect to the endpoint. GetEndpoints call will be skipped. |
1792 |
OpcUaDiscoveryServerUrl |
URL of the UA Discovery Server. |
1919 |
OpcUaDisplayName |
Display name of the node. |
1818 |
OpcUaDisplayNameLanguage |
The language of the Display Name. |
1819 |
OpcUaInitialPublishRequests |
Initial publish requests which will be sent to UA Server for each subscription. |
1848 |
OpcUaMaxItemsPerSubscription |
The maximum number of monitored items, which will be assigned to a subscription. |
1191 |
OpcUaMaxMonitoredItemsPerCall |
Maximum size of the itemsToCreate array when a Client calls the CreateMonitoredItems, ModifyMonitoredItems, or SetMonitoringMode Service. |
1882 |
OpcUaMaxNodesPerBrowse |
Maximum size of the nodesToBrowse array when calling the Browse Service or the continuationPoints array when a Client calls the BrowseNext Service. |
1881 |
OpcUaMaxNodesPerRead |
Maximum size of the nodesToRead array when a Client calls the Read Service. |
1883 |
OpcUaMaxReferencesPerBrowseNode |
This indicates the maximum number of references to return for each starting Node specified in the browse request. The value 0 indicates that the Client is imposing no limitation. |
1195 |
OpcUaMaxSubscriptionNumber |
The maximum number of subscriptions. |
1192 |
OpcUaMonitorTimestamp |
The UA Server should create notification when value, status or timestamp changes. By default UA Server will send a notification when value or status changes. |
1212 |
OpcUaMonitoredItemParams |
Defines parameters for item monitoring. |
1022 |
OpcUaNodeData |
Properties specific for UA node. |
1822 |
OpcUaOperationLimits |
Some limits used for calling UA Server services. |
1880 |
OpcUaOrganizationName |
Organization name used for creation of application description and for creation of self signed certificate. Should be the same as the organization name in the client certificate. |
1724 |
OpcUaOverwriteEndpointHostName |
If this option is set, the hostnames returned by the GetEndpoints request will by replaced by the hostname that was used in the discovery URL. This modified URL is then used for establishing the session to the endpoint. |
1175 |
OpcUaOwnCertificateDetails |
Settings of the own client certificate. |
1830 |
OpcUaPasswordProtectPrivateKey |
Set this property to protect private key. |
1731 |
OpcUaPrivateKeyPassword |
Private key will be protected with this password. |
1732 |
OpcUaPropertyManagement |
The property management settings. |
1008 |
OpcUaPropertyStrategy |
The strategy to query and create property objects. |
1009 |
OpcUaPublishingOptions |
Options of UA client publishing. |
1849 |
OpcUaQueueSize |
The requested size of the MonitoredItem queue of the OPC UA Server. |
908 |
OpcUaRejectUnencryptedUserNameToken |
If this property is set, connections using unencrypted user token will not be created. |
1827 |
OpcUaRequestedSamplingRate |
The sampling interval defines the cyclic rate used by the server to sample the real item. A negative number indicates that the default sampling interval defined by the publishing interval of the Subscription is requested. The Client may also specify 0 for the sampling interval, which indicates that the Server should use the fastest practical rate. |
1038 |
OpcUaSecurityMode |
Specifies what security mode should be applied to messages exchanged during a session. |
697 |
OpcUaSecurityPolicy |
The security policy of the OPC UA Server connection. |
698 |
OpcUaSerializerMaxAlloc |
The largest size of a memory block the serializer can do when deserializing a message. |
1688 |
OpcUaSerializerMaxArrayLength |
Maximum number of elements in an array accepted by the serializer. |
1692 |
OpcUaSerializerMaxByteStringLength |
The largest byte string accepted by the serializer. |
1690 |
OpcUaSerializerMaxMessageSize |
The maximum number of bytes per message in total. |
1693 |
OpcUaSerializerMaxStringLength |
The largest string accepted by the serializer. |
1689 |
OpcUaSerializerOptions |
OPC UA network serializer options. Please note that such settings should only be modified with good reason as they may affect the overall reliability of the OPC UA communication stack. |
1702 |
OpcUaServerAppCertificateScriptResult |
The result from calling the Lua script handling untrusted application instance certificates from clients. |
2660 |
OpcUaServerAppCertificateTrustMode |
Certificate trust mode for untrusted application instance certificates received from clients during a secure channel handshake. |
2659 |
OpcUaServerAppCertificateTrustModeScript |
Settings for the Lua script trust mode for the untrusted application instance certificate handling. |
2661 |
OpcUaServerBindAddress |
Bind the server socket to an IP address or host name. If empty, the server will listen on all available network interfaces. Setting a host name that resolves to an IPv6 address is not supported yet. |
2168 |
OpcUaServerCapabilitiesSettings |
Set OPC UA server capabilities. |
2174 |
OpcUaServerCertMgmt |
Controls how OPC UA certificates are managed. |
2656 |
OpcUaServerCertStoreSyncInterval |
The interval in seconds between syncing information with the certificate store. |
2662 |
OpcUaServerCertificateFileName |
The file name of the UA Server certificate. |
1794 |
OpcUaServerDiscoveryPath |
UA server discovery path, without any host name or port (a null value disables the discovery endpoint). |
2151 |
OpcUaServerEndpointCommunication |
UA TCP server endpoint communication configuration. |
2153 |
OpcUaServerEndpointPath |
UA server endpoint path, without any host name or port. |
2154 |
OpcUaServerEndpointSecurityLevel |
Indicates how secure the endpoint is compared to other endpoints for the same server. A value of 0 indicates that the EndpointDescription is not recommended and is only supported for backward compatibility. A higher value indicates better security. |
2155 |
OpcUaServerInformation |
The information about the OPC UA Server. |
839 |
OpcUaServerRejectedCerts |
A summary of all currently rejected certificates in the certificate store. |
2658 |
OpcUaServerServiceBrowseTimeout |
The timeout in milliseconds for Browse service calls used by the OPC UA server if no timeout is provided by the client. If not set, the default timeout is used. |
2171 |
OpcUaServerServiceDefaultTimeout |
The default service call timeout in milliseconds used by the server for all services if no timeout hint is provided by the client. |
2170 |
OpcUaServerServiceHistoryReadTimeout |
The timeout in milliseconds for HistoryRead service calls used by the OPC UA server if no timeout is provided by the client. If not set, the default timeout is used. |
2172 |
OpcUaServerServiceSettings |
OPC UA server service call settings. |
2169 |
OpcUaServerSessionCountMax |
Maximum number of concurrent OPC UA sessions. |
2176 |
OpcUaServerSessionLimits |
Configures the session limits for the OPC UA server. |
2175 |
OpcUaServerSessionTimeoutMax |
Maximum OPC UA session timeout in seconds. A client requesting a session timeout greater than this maximum value will have its value revised to this maximum. |
2179 |
OpcUaServerSessionTimeoutMin |
Minimum OPC UA session timeout in seconds. A client requesting a session timeout lower than this minimum value will have its value revised to this minium. |
2178 |
OpcUaServerState |
The execution state of the server. |
769 |
OpcUaServerStatus |
This contains elements that describe the status of the Server. |
753 |
OpcUaServerTrustedCerts |
A summary of all currently explicitly trusted certificates in the certificate store. |
2657 |
OpcUaServerUrl |
The Server discovery or endpoint URL. |
906 |
OpcUaServerUserTokenPolicies |
The user token policies supported by this OPC UA endpoint. |
2156 |
OpcUaServerUserTokenPolicyAnonymous |
Anonymous OPC UA endpoint user token policy. This policy is not recommend for insecure endpoints. |
2157 |
OpcUaServerUserTokenPolicyAnonymousPassword |
Password for the profile of this Anonymous OPC UA user token policy. |
2161 |
OpcUaServerUserTokenPolicyAnonymousProfileMapping |
Maps this Anonymous OPC UA user token policy to an inmation profile. |
2160 |
OpcUaServerUserTokenPolicyEnable |
Enable this OPC UA endpoint user token policy. |
2159 |
OpcUaServerUserTokenPolicySecurityPolicy |
OPC UA security policy for the endpoint user token policy. Using no security is not recommended. If set to null, the endpoint security policy is used for this user token policy. |
2162 |
OpcUaServerUserTokenPolicyUserName |
User Name OPC UA endpoint user token policy. Authentication is based on a username / password token. |
2158 |
OpcUaServiceCallOptions |
OPC UA service call options. |
1705 |
OpcUaServiceCallReturnDiagnosticsInfo |
If checked, the UA Server may return vendor-specific diagnostics in the case when the service call fails. |
1698 |
OpcUaServiceCallTimeoutHint |
Maximum timeout in milliseconds for UA client to server calls. The value of 0 indicates no timeout. |
1701 |
OpcUaSubscriptionOptions |
The limits which will be applied to newly created subscriptions. |
1189 |
OpcUaTcpConnectionDefaultChunkSize |
The maximum number of chunks per message in total. |
1695 |
OpcUaTcpConnectionMaxChunkCount |
The default and maximum number of message chunks per message. Affects memory usage. |
1697 |
OpcUaTcpConnectionMaxMessageLength |
The default and maximum size for messages. Affects memory usage. |
1696 |
OpcUaTcpConnectionOptions |
OPC UA network connection options. Please note that such settings should only be modified with good reason as they may affect the overall reliability of the OPC UA communication stack. |
1704 |
OpcUaTcpServerCommunication |
UA TCP server communication configuration. |
2152 |
OpcUaTcpServerListenerPort |
The port the UA TCP server will listen on for incoming connections. |
2150 |
OpcUaTimestampCurrent |
The current time (UTC) as known by the server. |
759 |
OpcUaUseDataChangeFilter |
If this option is set the UA Client will set a DataChange filter on the CreateMonitoredItems call. Filter parameters need to be specified (see below). |
1208 |
OpcUaUserIdentity |
Defines the type of user identity for UA Server connection. |
1826 |
OpcUaUserIdentityType |
Defines user identity applied for UA Server connection. |
1825 |
OpcUaUserTokenPolicyId |
An identifier for the UserTokenPolicy assigned by the Server (applied only for direct endpoints). Null or empty user token should be interpreted as anonymous by the server. |
1816 |
OpcUaUserTokenSecurity |
Security policy of user token (applied only for direct endpoints). |
1815 |
OpcUaWriteIgnoreQuality |
Don't specify quality during OPC UA Write. |
11793 |
OpcUaWriteIgnoreTimestamp |
Don't specify timestamp during OPC UA Write. |
11794 |
OpcUaWriteOptions |
Options for OPC UA Write service. |
11789 |
OpcWriteMode |
OPC writing mode. |
1050 |
OpcXmlAdvancedPolling |
This parameter enables more sophisticated polling approach in order to optimize the behavior of the server in its response to client requests for data. |
1551 |
OpcXmlBrowseMaxElementsReturned |
OPC XML Server Browse() call must not return any more elements than this value. If MaxElementsReturned is missing or 0 then there is no client side restriction on the number of returned elements. |
1573 |
OpcXmlCClientOptions |
The Options which our client may apply to work-around improper OPC DA Server implementations. |
604 |
OpcXmlGroupNumber |
The maximum number of groups. |
1566 |
OpcXmlGroupOptions |
Options which our client may apply to work-around improper OPC DA Server implementations with respect to Server Groups. |
1568 |
OpcXmlItemDeadband |
This parameter specifies the percentage of the full engineering unit range of an item’s value that must change prior to the value being of interest to the client. “Uninteresting” value changes are those which are less than the Deadband and are not maintained or saved by the server for return to the client. |
1554 |
OpcXmlItemEnableBuffering |
If True, the client is requesting that the server use the RequestedSamplingRate to check for value changes and save all changes in a buffer for return to the client at the next SubscriptionPolledRefresh request. |
1555 |
OpcXmlItemRequestedSamplingRate |
This specifies the rate in milliseconds at which the server should check for value changes. If the item-specific sampling rate is not set (is equal 0), the default value of 1000 ms will be applied. |
1553 |
OpcXmlItemRevisedSamplingRate |
The server responds to the client with the actual update rate that it can support. |
1561 |
OpcXmlItemsPerGroup |
The maximun number of Items which will be assigned to a group. |
1567 |
OpcXmlPolledRefreshRequestDeadline |
Indicates the specific time period that the client wants to wait for the server to process a response from Subscription Polled Refresh(). If not set (is equal 0) then the server will use some server specific period to process the response. |
1562 |
OpcXmlPollingHoldTime |
This parameter instructs the server to hold off returning from the SubscriptionPolledRefresh call until the specified absolute server time is reached. |
1550 |
OpcXmlPollingWaitTime |
This parameter instructs the server to wait the specified duration (number of milliseconds) after the Holdtime is reached before returning if there are no changes to report. A change in one of the subscribed items, during this wait period, will result in the server returning immediately rather than completing the wait time. |
1549 |
OpcXmlRequestDeadlines |
Settings for request deadlines. |
1563 |
OpcXmlSubscribeRequestDeadline |
Indicates the specific time period that the client wants to wait for the server to process a response from Subscribe(). If not set (is equal 0) then the server will use some server specific period to process the response. |
1564 |
OpcXmlSubscriptionItemParams |
Settings for item subscription. |
1552 |
OperatingSystemName |
The Operating System Name. |
54 |
OperationScope |
Compound for application mode settings. |
5284 |
OtherOptions |
Compound for additional options. |
5209 |
OtherValue |
Other Value if you selected "Other" in the list above. |
735 |
OutputOptions |
Output Options. |
4143 |
OverrideAuditTrailStrategy |
If checked, the Audit Trail Strategy of the root object is used for all objects. |
11799 |
PIAFDatabase |
The name of the PI-AF-Database which will be used if the PI-AF-Server is specified. |
4167 |
PIAFSDKVersion |
The determined PI-AF-SDK Version. |
11900 |
PIAFServer |
The name of the PI-AF-Server which will be used for the connection. If set this setting overwrites the PI-Server setting above, enforces the PI-AF SDK to be used for the calls. |
4166 |
PIBatchDataInterface |
Specifies which Interface will be used for batch data retrieval (applies only to batch data processing functions). |
6463 |
PIBridgeConnected |
The date and time the PI-Bridge was recently connected. |
11891 |
PIBridgeDebug |
Switch the debug mode on. |
2861 |
PIBridgeDiagnostics |
Compound for PI-Bridge Diagnostics. |
11890 |
PIBridgeDisplayName |
The service display name of the PI-Bridge being used. |
11895 |
PIBridgeHost |
The hostname or IP address of the PI-Bridge. |
2859 |
PIBridgeLibraryVersion |
The PI-Bridge Lua library version being used. |
11896 |
PIBridgeOpenTime |
The duration the PI-Bridge is open. |
11892 |
PIBridgePort |
The port number of the PI-Bridge. |
2872 |
PIBridgeService |
The service name of the PI-Bridge being used. |
11894 |
PIBridgeVersion |
The version number of the PI-Bridge being used. |
11893 |
PIConnection |
Compound for PI connection parameters. |
2790 |
PISDKVersion |
The determined PI-SDK Version. |
11898 |
PIServer |
Name of the PI server. |
2792 |
PIServerNames |
The resolved PI Server Names. |
11899 |
Packages |
This is the desired package configuration for this service component. |
11815 |
PartialBatches |
Select this option if the equipment executes partial batches. This implies that other equipment objects in the same hierarchy execute partial baches too. |
5236 |
Passphrase |
Passphrase to authorize clients. |
1811 |
Password |
Password. |
23 |
Patterns |
A list of patterns to match the file names, which will be processed. If no pattern is provided all files will be processed. The patterns have to be provided in RegEx-syntax. The filenames will be converted to lower case before the RegEx is evaluated. Example: '^.*.(xml)$' to process all XML-files, https://regex101.com/. |
6483 |
PenDraw |
Controls the drawing of the pen, the pen is always shown in the legend. |
12036 |
PenIsTimeSeries |
Determines how the xy data is correlated on the Plot. If 'Is time series' is true, then x values are interpolated to match the x value; otherwise, x and y pairs are determined based on order received from the data source. |
2187 |
PenPlotContents |
Determines if the pen's 'Y data', 'Y data and Fit Line', or just 'Fit Line' are plotted for the Pen. |
2185 |
PenStyle |
Pen style. |
12032 |
PenTrendType |
Pen Trend Type. |
12017 |
PenX |
The pen x value for the xy plot. |
2182 |
PenY |
The pen y value for the xy Plot. |
2183 |
PenYDataLineType |
The plot line type for the xy plot pen if y data is plotted. |
2184 |
PercentDeadband |
Percent Deadband. |
151 |
PercentLoad |
Load percentage in respect to the processing time hint, which was received by the object recently. |
4155 |
Performance |
Property back-end for performance counters. |
611 |
PerformanceAssignment |
Performance Assignment. |
377 |
PerformanceIndex |
The performance index for the operation. |
6757 |
PersistBuffer |
This is a hidden property, which is accessible by Lua Script only. |
1122 |
PersistencyMode |
Options to control the persistency of the dynamic property value of the object. |
2034 |
PersistencyTimeout |
When set, the persisted dynamic value is not used if it is older than the specified timeout in seconds (e.g. 86400 would be the correct setting to persist the dynamic value for a maximum of one day). If not set, no timeout is used. |
1121 |
PhysicalRangeHigh |
The high end of the range to which the raw input data should be mapped to. It will be used for rescaling if Conversion Mode is set to Rescaling. |
2456 |
PhysicalRangeLow |
The low end of the range to which the raw input data should be mapped to. It will be used for rescaling if Conversion Mode is set to Rescaling. |
2455 |
PkgAutoUpdate |
Whether the package should be automatically updated to higher version as they become available in the system store. |
11810 |
PkgConfigString |
An opaque configuration string that is passed to the package when it is installed. |
11812 |
PkgDiagnostic |
This is diagnostic information provided by the Package Installer. |
11814 |
PkgExactVersion |
Whether the configured package version must match exactly the version of the installed package. |
11811 |
PkgInstaller |
Package Installer configuration and runtime state. |
11816 |
PkgInstance |
The instance name. It can be left blank if multiple instances are not needed. |
11809 |
PkgName |
The version-independent package name. |
11807 |
PkgStatus |
This is used by the Package Installer to orchestrate package distribution. |
11813 |
PkgVersion |
The dotted version string, such as 2.14.5.7. This is either the minimal or the exact version that will be installed depending on other configuration settings. |
11808 |
PlcABLogix5000ConnectionType |
Specify the type of the Allen-Bradley Logix 5000 connection. |
6474 |
PlcABLogix5000Device |
Compound for Allen-Bradley Logix 5000 configuration. |
6464 |
PlcABLogix5000ENIPParam |
Compound for Allen-Bradley Logix 5000 EtherNet/IP parameter. |
6475 |
PlcABLogix5000StationParam |
Compound for Allen-Bradley Logix 5000 station parameter. |
6465 |
PlcArrayCount |
The number of elements in a data array or the number of characters (0 - 254) in a string. |
2520 |
PlcCIPArrayDim1 |
The number of elements in dimension 1 of a data array. |
6501 |
PlcCIPArrayDim2 |
The number of elements in dimension 2 of a data array. |
6502 |
PlcCIPArrayDim3 |
The number of elements in dimension 3 of a data array. |
6503 |
PlcCIPConnectTimeout |
The timeout for the initial CIP connection establishment to the PLC. |
6468 |
PlcCIPExplodeStructOnBrowse |
Create child I/O-items below structured tags for each member when browsing the data source. |
6504 |
PlcCIPInterval |
The CIP Requested Packet Interval for connected messaging. |
6470 |
PlcCIPLoadTags |
Load tags and tag type information when connecting to the PLC. This is required for reading structure tags. |
6506 |
PlcCIPLoadTagsTimeout |
The initial CIP connection timeout if tag-loading takes place (e.g. for a browse operation). |
6469 |
PlcClassType |
The PLC type. |
2499 |
PlcClientDebug |
Log PLC client debug messages - this may lead to a high number of log entries. |
6477 |
PlcClientOptions |
Compound for PLC client options. |
6476 |
PlcClock |
Current PLC clock value. |
2514 |
PlcConnectionTypeSelector |
The PLC connection type. |
2501 |
PlcCycleTime |
Compound for PLC cycle times. |
2516 |
PlcCycleTimeCurrent |
The current cycle time of the PLC. |
2519 |
PlcCycleTimeMax |
The maximal cycle time of the PLC. |
2518 |
PlcCycleTimeMin |
The minimal cycle time of the PLC. |
2517 |
PlcDeviceInfo |
Compound showing PLC device information. |
2475 |
PlcDeviceTypeSelector |
The device type of the PLC. |
2483 |
PlcENIPAdvanced |
Advanced PLC EtherNet/IP connection parameter. |
6472 |
PlcENIPPath |
The connection path for routing requests on the CIP network. |
6471 |
PlcENIPPort |
The remote port for the EtherNet/IP connection. |
6467 |
PlcENIPSlot |
The slot number of the CPU on the rack containing the EtherNet/IP card. If a path is specified, the slot number is ignored. If either slot or path is not specified, the rack is scanned and the first CPU found is used. |
6473 |
PlcHostnameOrIp |
The hostname or IP address of the PLC CPU. |
2493 |
PlcLocalIp |
The IP address of the local network card to use. |
2496 |
PlcMLFBNr |
The MLFB Number of the PLC. |
2482 |
PlcOpState |
The current operating state of the PLC. |
2476 |
PlcPort |
The remote port for the PLC connection. |
2494 |
PlcRack |
The number of the rack, to which the PLC is connected to. |
2497 |
PlcRuntimeInfo |
Compound showing PLC runtime information. |
2515 |
PlcS7TcpIpConnParam |
Compound for S7-TCP/IP connection parameter. |
2489 |
PlcS7TcpIpDevice |
Compound for S7-TCP/IP configuration. |
2485 |
PlcS7TcpIpProjectedParam |
Compound for S7-TCP/IP projected connection parameter. |
2490 |
PlcS7TcpIpRoutingParam |
Compound for S7-TCP/IP routing connection parameter. |
2491 |
PlcS7TcpIpStationParam |
Compound for S7-TCP/IP station parameter. |
2486 |
PlcS7TcpIpTiaConnParam |
Compound for S7-TCP/IP TIA connection parameter. |
2488 |
PlcS7TcpIpTiaDevice |
Compound for S7-TCP/IP TIA configuration. |
2484 |
PlcSlot |
The slot number occupied by the PLC. |
2498 |
PlcStationCIPTimeout |
The maximum waiting time in milliseconds for the receipt of a CIP message in response to a request. |
6466 |
PlcStationTimeout |
The maximum waiting time in milliseconds for the receipt of a PLC message in response to a request. |
2487 |
PlcStep7DataType |
The Step7 data type for a S7-300/400 data symbol. |
2513 |
PlcTiaClassType |
The PLC type. |
2495 |
PlcTiaConnectionType |
The connection type specifies how inmation identifies itself when connecting to the PLC. |
2492 |
PlcType |
The PLC type. |
2500 |
Points |
Shows the count of points which have been fetched during the most recent run. |
2801 |
PollingParameters |
The Kafka Producer polling parameters. |
6545 |
PollingRepeats |
The number of polling repetitions. |
6548 |
PollingTimeout |
This timeout is used internal for polling only. The default of 1000 ms is recommended for remote servers. For local servers 100 ms should be fine. |
6547 |
Port |
The port number. |
15 |
ProcessMode |
Configure the processing mode of the object. |
12178 |
ProcessState |
Shows the current processing state of the object. |
2794 |
ProcessValueLink |
Dynamic property link. |
639 |
ProcessedFiles |
A table with the recent processed files. |
6511 |
ProcessorName |
The CPU Name. |
55 |
ProductOptions |
Allows to classify products. |
6568 |
ProductSQL |
The SQL merge command which will be used to insert additional educts and products into the target table. |
3025 |
ProductionTrackingDatabase |
The database storing production tracking data. |
5283 |
ProductionTrackingEnable |
Enable the production tracking data store. |
5285 |
ProductionTrackingFilterOptions |
Filter settings to select particular Batch Production Records to be assigned to this store. |
12158 |
ProductionTrackingFilterScript |
A Lua script returning true or false when passed in a particular BPR document. |
12159 |
ProductionTrackingPurgeMax |
The maximum number of BSON documents purged in a single batch operation. |
12152 |
ProductionTrackingPurgeOptions |
Controls what happens to an object's data in the store after the object's deletion. |
12153 |
ProductionTrackingRetention |
The maximum age of data in the archive. |
12151 |
ProductionTrackingStoreSelector |
Configure Production-Tracking Store that is queried by this display. |
12176 |
ProfileModelAccess |
The access rights to this model. |
359 |
ProfileUserAccess |
This option group defines the general access rights for users belonging to the profile. |
282 |
ProgID |
The PROGrammatic Identifier (ProgID) is a COM term, which is basically a string like "inmation.Opc.Server.1" to represent an underlying ClassID which is something like {F9043C85-F6F2-101A-A3C9-08002B2F49FB}. |
33 |
ProgIDAlias |
An alias for the Prog ID. |
2349 |
PropertyBlacklist |
The property blacklist defines the numerical property codes which are excluded from any operation, i.e.: "1-6;9-103" excludes the codes 1 to 6 and 9 to 103. |
506 |
PropertyChangeTracking |
If switched on, detected changes for this property are historized. This feature works in conjunction with the selected 'Refresh Strategy' and 'Period'. |
256 |
PropertyCode |
The code of the property according to the endpoint server type's specification. |
174 |
PropertyExcludeRedundant |
Exclude Redundant Properties. |
507 |
PropertyInformation |
This is the compound to pool the OPC Server information for properties. |
589 |
PropertyManagement |
Configurable Settings of OPCProperties. |
180 |
PropertyRefreshPeriod |
This is the time period which will be used to refresh properties which do not support subscriptions. |
177 |
PropertyRefreshStrategy |
Refresh Strategy. |
178 |
PropertyStrategy |
OPC property strategy to query and create property objects. |
578 |
PropertyUpdateRate |
This is the update rate which will be used if a certain property can be subscribed to, based on a server supplied Item ID. |
579 |
PropertyValue |
The current property setting. |
173 |
PropertyValueTranslation |
Table for translations of property values to various languages. |
3052 |
PropertyWhitelist |
The property whitelist defines the numerical property codes which are used to create property objects. The default value "7-8,104-" does not include the properties which are assigned to I/O-Items automatically. |
505 |
PublishTimeout |
Maximum number of milliseconds to wait for network activity in the select() call before timing out. Set to 0 for instant return. |
6561 |
Quality |
Check this option if the quality should be exported additionally as separated column. |
4128 |
Queries |
The number of queries executed against the server in the last call. |
6750 |
Query |
The query which will be executed. Dynamic parameters will be replaced at runtime (__STARTIME__, __STARTTIMELOCAL__, __ENDTIME__, __ENDTIMELOCAL__ and dynamic variables). |
6454 |
QueryExecution |
The properties defining the query execution and schedule. |
6453 |
QueryObject |
An objects that is used in the query. |
2374 |
QueryObjects |
List of objects that are used in the query. |
2131 |
QueryTimeout |
The maximum time in seconds that each query operation can take. MongoDB aborts the operation if a query takes more time than this. |
6737 |
QueueBufferingBackpressureThreshold |
The threshold of outstanding not yet transmitted broker requests needed to backpressure the producer's message accumulator. If the number of not yet transmitted requests equals or exceeds this number, produce request creation that would have otherwise been triggered will be delayed. A lower number yields larger and more effective batches. A higher value can improve latency when using compression on slow machines. |
6689 |
QueueBufferingMaxKbytes |
Maximum total message size sum allowed on the producer queue. This queue is shared by all topics and partitions. This property has higher priority than .QueueBufferingMaxMessages. |
6683 |
QueueBufferingMaxMessages |
Maximum number of messages allowed on the producer queue. This queue is shared by all topics and partitions. |
6682 |
QueueBufferingMaxMs |
Delay in milliseconds to wait for messages in the producer queue to accumulate before constructing message batches (MessageSets) to transmit to brokers. A higher value allows larger and more effective (less overhead, improved compression) batches of messages to accumulate at the expense of increased message delivery latency. |
6684 |
RandomArrayElements |
Variable Number of Elements. |
390 |
Range |
The range compound property. |
12037 |
RangeHigh |
The high end of the range of the input data. |
2762 |
RangeLow |
The low end of the range of the input data. |
2761 |
RawBoundValue |
If set, a request with aggregate Raw data will also request the boundary values for the selected time window. |
2004 |
RawHistoryCollectionStrategy |
Use this setting to define how granular the raw history collections will be organized in the data store. |
254 |
RawRangeHigh |
The high end of the raw range of the input data. It will be used for rescaling if Conversion Mode is set to Rescaling. |
2454 |
RawRangeLow |
The low end of the raw range of the input data. It will be used for rescaling if Conversion Mode is set to Rescaling. |
2453 |
ReadHistory |
User-defined script for reading history values. |
6598 |
ReadHistoryAtTime |
User-defined script for reading a single history value at a given time. |
6599 |
ReadValue |
User-defined script for reading the actual value. |
6597 |
RealtimeQueryOptions |
Options to configure Report Designer datasource Realtime. |
2125 |
ReceiveMessageMaxBytes |
Maximum Kafka protocol response message size. This serves as a safety precaution to avoid memory exhaustion in case of protocol hickups. |
6607 |
RecentAEEvent |
The time when the most recent Asset Effectiveness event was raised. |
6576 |
RecentAEEventContent |
The payload attribute content of the most recent Asset Effectiveness event. |
6577 |
RecentAcquisition |
The datetime of the recent acquisition. |
2994 |
RecentActivationLocal |
Indicates the recent scheduler activation in local time format. |
2796 |
RecentActivationUTC |
Indicates the recent scheduler activation in UTC time format. |
2797 |
RecentData |
The recently processed Data. |
2995 |
RecentError |
The most recent error, which was raised by this object. |
5170 |
RecentErrorTime |
The time when the most recent error was raised by this object. |
5171 |
RecentID |
The recently processed Batch ID. |
2993 |
RecentPTEvent |
The time when the most recent Production Tracking event was raised. |
6578 |
RecentPTEventContent |
The payload attribute content of the most recent Production Tracking event. |
6579 |
RecentRunEnd |
Shows the end time of the most recent run. |
2800 |
RecentRuntime |
Shows the runtime of the most recent process. |
2841 |
RecentRuntimeEnd |
Timestamp of recent runtime end. |
70 |
RecentRuntimeStart |
Timestamp of recent runtime start. |
69 |
RecentUpdate |
Timestamp of the most recent data update. |
169 |
ReconnectBackoffMaxMs |
The maximum time to wait before reconnecting to a broker after the connection has been closed. |
6628 |
ReconnectBackoffMs |
The initial time to wait before reconnecting to a broker after the connection has been closed. The time is increased exponentially until .ReconnectBackoffMaxMs is reached. -25% to +50% jitter is applied to each reconnect backoff. A value of 0 disables the backoff and reconnects immediately. |
6627 |
ReconnectPeriod |
The period, in seconds, between re-connects on a failed connection. |
593 |
Records |
The number of records returned by the server. |
6754 |
RecurByMinute |
Execution of the schedule by minute. |
2692 |
RecurBySecond |
Execution of the schedule by second. |
2691 |
RecurDaily |
Daily execution of the schedule. |
2695 |
RecurDayDistance |
Recurrence after the specified number of days. |
2702 |
RecurDayWeekday |
Daily recurrence at workdays only. |
2729 |
RecurEnd |
The end date of the scheduler. |
2755 |
RecurHourDistance |
Recurrence after the specified number of hours. |
2701 |
RecurHourly |
Hourly execution of the schedule. |
2694 |
RecurMinDistance |
Recurrence after the spacified number of minutes. |
2698 |
RecurMonthDistance |
Recurrence after the specified number of months. |
2703 |
RecurMonthly |
Monthly execution of the schedule. |
2696 |
RecurSecDistance |
This value defines the activation period duration in seconds. |
2690 |
RecurStart |
The start date of the scheduler. |
2753 |
RecurWeekDistance |
Recurrence after the specified number of weeks. |
2706 |
RecurWeekly |
Weekly execution of the schedule. |
2705 |
RecurYearDistance |
Recurrence after the specified number of years. |
2704 |
RecurYearly |
Yearly execution of the schedule. |
2697 |
RedundancyLatency |
If the value of a referenced item is older than this time period (in milliseconds), it will be ignored. |
2892 |
Refetch |
When entering a time period specification (such as *-1D), the HistoryTransferController will refetch historical data according to this specification. The transfer will be organized in a cooperative mode with continuous UTD transfers and execute chunk-wise. Once the refetch is completed for all streams the parameter will be reset. In addition, the progress of the current refetch can be monitored in the Diagnostics field “RefetchProgress”. |
5311 |
RefetchProgress |
Indicates the progress of the current refetch operation. |
5320 |
RefetchValues |
Shows the absolute number of refetch data transfers in the current cycle. |
5318 |
RefreshTokenLifeTime |
The period in seconds a refresh token remains valid after being issued. The lifetime for a refresh token must be longer than the lifetime of an access token. |
2825 |
ReinsertEducts |
Allows to reclassify regular educts to reinserted educts. |
6574 |
RelayCommSettings |
Configure the communication settings. |
741 |
RelayServerPort |
Relay server (listener) port for core service communication, default port setting is 6511. |
738 |
Reload |
Forces the object to reload the code-behind. Does not reset the state. |
5186 |
RemainingTime |
The remaining time to the next scheduler activation. |
2754 |
RemoteHost |
The name of the remote host. |
10 |
ReplicaSet1 |
The connection string for the core service to replication set 1. |
247 |
ReplicaSet2 |
The connection string for the core service to replication set 2. |
248 |
ReplicaSetName |
Configuration name for MongoDB Replica Set. |
344 |
ReportCompound |
Contains one or multiple property sets for this Report Item. |
2405 |
ReportDataSetName |
Name of the DataSet visible in Report Designer. |
2417 |
ReportDefault |
If this property is checked this report is the default report. |
2408 |
ReportDesign |
The design data for the report, which is used to render the source data. |
2409 |
ReportDesignTimeData |
This optional property can hold the expected report scheme which was used at design time. |
2410 |
ReportFitSourceData |
Choose this option if you have stored design time data in the appropriate property and you want the system to evaluate differences between design and source data. This may impact the performance. |
2412 |
ReportItemPath |
Path to item containing report template and configuration of data queries. |
2414 |
ReportItemPicker |
Define the associated report item object. |
5366 |
ReportItemProperties |
Properties used to create report. |
2427 |
ReportName |
The logical name of the report. |
2406 |
ReportOrder |
The display order of this report in the report selection list. |
2407 |
ReportPath |
Path of the Report Item, where the new value will be written. |
3004 |
ReportTemplateXml |
XML configuration of the Report Designer. |
2129 |
RequestRequiredAcks |
This field indicates the number of acknowledgements the leader broker must receive from ISR brokers before responding to the request: 0=Broker does not send any response/ack to client, -1=Broker will block until message is committed by all in sync replicas (ISRs). |
6696 |
RequestTimeoutMs |
The ack timeout of the producer request in milliseconds. |
6697 |
RequestedUpdateRate |
The Update Rate which is requested. |
145 |
ResetStatus |
The status table will be cleared. |
4168 |
RetryBackoffMs |
The backoff time in milliseconds before retrying a protocol request. |
6688 |
RgDataProvider |
Contains properties that describe the data providing mechanism that should be used by the report generator. |
5371 |
RgDataProviderFunction |
Property groups to define script function properties. |
6421 |
RgDataProviderFunctionParameter |
Provide script that should be used as data provider for report generator. |
6422 |
RgDataProviderMode |
Select the data providing mechanism used by the report generator. |
5372 |
RgDataProviderObject |
Properties to define a data provider object. |
6419 |
RgDataProviderObjectPath |
Item that should be used as data provider. |
6420 |
RgOutputFolder |
The defined folder where output report data should be generated. |
6428 |
RgOutputFormat |
Output file format. |
6431 |
RgOutputOptions |
The compound specified Report Generator Output Options. |
6427 |
RgReportName |
Specifies the report name to use. If not specified, the default report name will be used. |
6426 |
RootCreationTime |
Timestamp of root object first creation. |
48 |
RootDirectory |
Root directory of the static content server. Can be a relative or absolute path to the directory in the file system. |
5212 |
RootDriveFreeSpace |
Free Space on Root Drive. |
58 |
RootDriveSize |
Size of Root Drive. |
57 |
RoutingInfo |
A&E Routing Information. |
706 |
RowAssignment |
Specifies the assignment strategy for this spreadsheet row. |
1239 |
RowNumber |
Specifies the row number, which holds data to be assigned to the object. |
1234 |
RuleAction |
Action that will be executed when Rule triggers. |
355 |
RuleConditions |
Conditions, under which this rule will be executed. |
354 |
RuleTarget |
Target object of this rule. |
357 |
RuleTemplate |
Template that will be used when this rule executes. |
360 |
RuleTracing |
Create trace information for rule objects. |
558 |
RuleTrigger |
Trigger that defines when to execute this rule. |
352 |
RunOnce |
If checked, the object will run once and return to default state. |
6436 |
RunScriptEnable |
Specifies the 'RunScript' feature is enabled. |
2820 |
Runtime |
The total runtime of the operation. |
6751 |
RuntimeEnd |
Runtime End. |
68 |
RuntimeID |
The identifier for a distinct service runtime, which will be increased with every service start. |
71 |
RuntimeInformation |
Information regarding the current runtime. |
74 |
RuntimeStart |
Timestamp of runtime start. |
64 |
S88DetailLevel |
Determine the level of detail the data provides in respect to S88 definitions. |
5238 |
S88Settings |
Properties to configure the batch tracker related to S88 definitions. |
5237 |
S95ObjectName |
The name to be used for auto-creation of an associated object in the S95-Equipment model. |
3073 |
S95OwnerObjects |
A list of object paths (eg. '\\^/System/Core/obj1 \\^/obj2') from the S95 Equipment Model which shall store their respective BPR documents in this store. |
12157 |
S95Settings |
Properties to configure the batch tracker related to S95 definitions. |
5233 |
S95Target |
Select the ISA-95 object, which is assigned to the Unit Batch. |
2972 |
SPCType |
Statistical process control (SPC) is a method of quality control which uses statistical methods. SPC is applied in order to monitor and control a process. Monitoring and controlling the process ensures that it operates at its full potential. |
2093 |
SQLCatalog |
A catalog of the properties of objects in the component which can be queried via SQL interface. Any changes will only be read on restart. |
1932 |
SQLCatalogOptions |
Options to create the SQL catalog. |
1933 |
SafDiskRepairMode |
The Store and Forward repair mode in case of a corrupt database. |
2394 |
SafDiskThresholdWarn |
Threshold for the Store and Forward disk usage triggering a warning. |
1204 |
SafFallbackMode |
The Store and Forward fallback mode in case of an unrecoverable corrupt database. |
2395 |
SafKeepLostData |
Keep lost data after repairing a corrupted Store and Forward database. |
3038 |
SafMainRetentionPolicy |
Store and Forward retention method selection. |
688 |
SafMaxBufferedAuditTrailEntries |
The maximum number of audit trail entries to buffer in memory. |
6531 |
SafMaxBufferedEventEntries |
The maximum number of events to buffer in memory. |
943 |
SafMaxBufferedLogEntries |
The maximum number of log entries to buffer in memory. |
609 |
SafMaxBufferedVqtData |
The maximum number of historic data to buffer in memory. |
651 |
SafMaxDiskPercentage |
Use up to the specified percentage of disk space for the Store and Forward database. |
679 |
SafMaxDiskSize |
Maximum size on disk of the Store and Forward database in GB. |
677 |
SafOperatingStatus |
The current operating status of the Store and Forward system. |
2397 |
SafOptions |
General configuration options for Store and Forward. |
964 |
SafPurgeAction |
Execute a purge action on the Store and Forward system. |
3040 |
SafRetainMode |
Retain new or old items if the specified limit is reached. |
692 |
SafRetentionDays |
Retain Store and Forward data in the database for the specified amount of days, after it finally gets deleted. |
681 |
SaslMechanism |
SASL mechanism to use for authentication. |
6543 |
SaslOauthbearerConfig |
SASL/OAUTHBEARER configuration. |
6676 |
SaslParameters |
The SASL parameters. |
6542 |
SaslPassword |
SASL password for use with the PLAIN and SASL-SCRAM-.. mechanism. |
6675 |
SaslSslParameters |
SASL-SSL configurable parameters. |
6706 |
SaslUsername |
SASL username for use with the PLAIN and SASL-SCRAM-.. Mechanisms. |
6674 |
SaveExpandetNodesInWorkspace |
Determines if the expanded nodes should be saved in workspace. |
2510 |
Schedule |
The property compound offering various options to define a recurrence pattern. |
2707 |
ScheduleDiagnostics |
Various runtime diagnostics related to the schedule. |
2711 |
ScheduleFrame |
The Inclusion Frame decides about general times when the Scheduler Item is active and may trigger activities. |
2688 |
ScheduleFromDay |
Specifies from which day the schedule shall be activated. |
2673 |
ScheduleFromDoW |
Specifies from which Day of Week the schedule shall be activated. |
2683 |
ScheduleFromDoWinMonth |
Specifies from which Day of Month the schedule shall be activated. |
2685 |
ScheduleFromHour |
Specifies from which hour the schedule shall be activated. |
2675 |
ScheduleFromMinute |
Specifies from which minute the schedule shall be activated. |
2677 |
ScheduleFromMonth |
Specifies from which month the schedule shall be activated. |
2671 |
ScheduleFromSecond |
Specifies from which second the schedule shall be activated. |
2679 |
ScheduleFromYear |
Sets the start year for the scheduler logic (0 equals to any year). |
2669 |
ScheduleLocalTime |
Execution of the schedule on the basis of the local time in the current time zone. |
2681 |
ScheduleMode |
Selection of the scheduling mode for the data transfer. |
2779 |
ScheduleObject |
Compound for schedule item parameters. |
2782 |
ScheduleRecurrence |
The Recurrence Pattern defines how the activation is triggered in respect to date and time distance. |
2682 |
ScheduleSimple |
Compound for simple recurrence parameters of the object. |
2781 |
ScheduleToDay |
Specifies to which day the schedule shall be activated. |
2674 |
ScheduleToDoW |
Specifies to which Day of Week the schedule shall be activated. |
2684 |
ScheduleToDoWinMonth |
Specifies to which Day of Month the schedule shall be activated. |
2686 |
ScheduleToHour |
Specifies to which hour the schedule shall be activated. |
2676 |
ScheduleToMinute |
Specifies to which minute the schedule shall be activated. |
2678 |
ScheduleToMonth |
Specifies to which month the schedule shall be activated. |
2672 |
ScheduleToSecond |
Specifies to which second the schedule shall be activated. |
2680 |
ScheduleToYear |
Specifies to which year the schedule shall be activated. |
2670 |
ScheduledObjectState |
Contains properties that describe the status of an object with scheduler item. |
5367 |
SchedulerItemPath |
The path of the scheduler item object. |
2787 |
Scheduling |
Compound to define the schedule of this object. |
2777 |
SciConnectTimeout |
inmationApi connection timeout. |
2370 |
SciHistoryParameters |
Advanced Parameters for ReadHistoricalData Request. |
2132 |
SciItemTimeout |
inmationApi item timeout. |
2314 |
SciReceiveTimeout |
inmationApi receive timeout. |
2369 |
SciSentTimeout |
inmationApi sent timeout. |
2368 |
ScriptLibrary |
The script library compound contains Lua-Script libraries. |
1187 |
ScriptOnBatchEnd |
Defines the script which runs at batch end. |
5347 |
ScriptOnOperationEnd |
Defines the script which runs at the end of an operation. |
5348 |
ScriptPeriodic |
Defines the script which runs periodically. |
5349 |
SecurityMode |
The security mode for components communicating to an inmation core service. |
1810 |
SecurityModeEffective |
Effective security mode currently in use for component communication. |
1879 |
SecurityProtocol |
Protocol used to communicate with brokers. |
6541 |
SecuritySettings |
The security settings for the component. |
12134 |
SequenceCompleteSQL |
The SQL statement, which will be issued after the main product and the additional products have been merged. |
4169 |
ServerAccessRights |
The server defined access rights for this object. |
624 |
ServerFilter |
The filter, if set, defines the branches allowed to the server's client. |
2416 |
ServerState |
The current status of the OPC server. |
553 |
ServerStateText |
The state of the Web API Server. |
2869 |
ServerTime |
The time in wait for the server response. |
6752 |
ServerType |
Endpoint Server Type selector. |
62 |
ServiceClass |
|
217 |
ServiceHost |
The name of the host on which the service is running. |
11 |
ServiceParameterList |
The Service Parameter List Structure. |
37 |
ServicePropertyList |
The Service Property List Structure. |
51 |
ShowAsReportDesigner |
If set, then the report will be open in Report Designer mode. Otherwise it will be open as Report Viewer. |
2209 |
ShowCalcsInChartCursor |
A boolean override that controls whether or not calculations (equations) are displayed in chart cursors. |
2074 |
ShowCalculationsInChartCursor |
Display calculations (equations) in chart cursors. |
1988 |
ShowChartInfo |
Hide/Show the chart information. |
2106 |
ShowConvertedValues |
Converts the value to text defined in mapping table. |
2440 |
ShowGroupInfo |
Hide/show group info column. |
1863 |
ShowJsonPresenter |
Show JSON-Presenter, if the value does contain JSON-Data. |
1928 |
ShowKPIInfo |
Hide/show KPI Info. |
1865 |
ShowLinebreaks |
Show multi-line value. |
1927 |
ShowLinkInfo |
Hide/show the link information. |
1873 |
ShowMilliseconds |
Show milliseconds when displaying DateTime values in UI. |
1045 |
ShowSparklines |
Controls whether or not sparklines are shown for KPIs and charts in this group (Sparklines feature must be enabled). |
2118 |
ShowTableInfo |
Hide/show table information. |
1871 |
ShowTrendInfo |
Hide/show trend information. |
1869 |
ShowValueInfo |
Hide/show value information. |
1867 |
SideProducts |
Allows to reclassify regular products to side products. |
6570 |
SimpleRecurrence |
Selection of the recurrence of the data transfer. |
2780 |
SinkBase64Parameters |
Parameters for Base64 splitting message format. |
12118 |
SinkByElementParameters |
Parameters for Split by Element message format. |
12117 |
SinkBySizeParameters |
Parameters for Split by Size message format. |
12116 |
SinkConfiguration |
Configuration of the auto-created history sink object. |
4148 |
SinkFlatJsonParameters |
Parameters for flag JSON message splitting. |
12120 |
SinkObjectName |
The object name of the history sink object. |
4151 |
Site |
Allows to define the site name the data belongs to. |
4120 |
SiteConfiguration |
Configuration of the sites. |
2849 |
SkipHistory |
If this Option is set no historical data will be transmitted to the sink. Only near time, up-to-date values will be streamed. |
5205 |
Slice |
Slice value for the pie chart. |
2188 |
SliceColor |
Display color of the slice in the pie chart. |
2190 |
SliceName |
Name of the slice in the pie chart that will appear to your users. Longer names may be truncated on small devices, so consider short names. |
2191 |
SliceOffset |
Relative time offset used to get values for the slice. This allows the pie chart to show slice values at different times such as Profit Today and Profit Last Week. This value uses our standard offset format (e.g. *-1day). |
2189 |
Slicing |
The slicing percentage indicates how much of a given processing time slice is used to fetch data from the external system. This can be done in order to limit the amount of data transfer on the network and historian. |
2785 |
SnapshotCall |
User provided script which receives a table with the following entries: ExternalID. ExternalID supplies the configured Tag Name, which is known in the external system. Additional parameters are: timeout, throttle. The table must be returned with a new 'data' field, containing a table of size 1: {V=, Q=, T=}. The 'Q' field is optional, the 'T' field must contain a POSIX millisecond value. Additional a 'timeout' parameter will be supplied, which is the latest moment of the user script terminating. In case you experience overload, consider adjusting the 'Slicing' parameter of the HistoryTransporter object. Running a HistoryTransporter in constant overload is not considered an inmation support case. Full function signature: return function(tbl,timeout,throttle). |
6763 |
SnapshotDiagnostics |
The diagnostic properties of this object. |
6761 |
SnapshotOptions |
Definition of snapshot updates. |
6749 |
SnapshotRefreshPeriod |
The time after snapshots will be updated. |
6748 |
SocketKeepaliveEnable |
Enable TCP keep-alives (SO_KEEPALIVE) on broker sockets. |
6622 |
SocketMaxFails |
Disconnect from broker when this number of send failures (e.g., timed out requests) is reached. Disable with 0. WARNING: It is highly recommended to leave this setting at its default value of 1 to avoid the client and broker to become desynchronized in case of request timeouts. NOTE: The connection is automatically re-established. |
6624 |
SocketNagleDisable |
Disable the Nagle algorithm (TCP_NODELAY) on broker sockets. |
6623 |
SocketReceiveBufferBytes |
Broker socket receive buffer size. System default is used if 0. |
6621 |
SocketSendBufferBytes |
Broker socket send buffer size. System default is used if 0. |
6620 |
SocketTimeoutMs |
Default timeout for network requests. |
6618 |
SoftwareArchitecture |
The software architecture of the executed file. |
724 |
SoftwareInformation |
Information about the current executable. |
722 |
SoftwareVersion |
The version of the executed file. |
723 |
SourceFolders |
A list of OS-directories which will be monitored. |
6482 |
SourceUnit |
The unit identifier which is used in the source system. |
2969 |
SoxListenerPort |
Sets the IP port number on which this server object exchange protocol server is accepting connections. |
311 |
SparklineEnd |
End time of the sparkline (absolute or relative). |
1856 |
SparklineOptions |
Compound holding the sparkline options for the KPI visualization. |
1852 |
SparklineRangesDefault |
Start and end time of "Default sparkline range" (1 record only, name fixed, start and end configurable). |
1112 |
SparklineStart |
Start time of the sparkline (absolute or relative). |
1855 |
SpecialRoles |
Special roles for the user. |
11985 |
SplittingSchema |
Define schema that is used to define how a message is split. |
12129 |
SslCa |
Certificate Authority (CA certificate) for verifying the broker's key. Note: Either .SslCaLocation or .SslCa should be specified; .SslCaLocation property will be prioritized over .SslCa if both specified. |
11870 |
SslCaLocation |
Certificate Authority (CA certificate) file for verifying the broker's key. Note: The path specified in this property is related to the system where Connector is running. Note: Either .SslCaLocation or .SslCa should be specified; .SslCaLocation property will be prioritized over .SslCa if both specified. |
6544 |
SslCertificate |
Client's public key (PEM) used for authentication. Note: Either .SslCertificateLocation or .SslCertificate should be specified; .SslCertificateLocation property will be prioritized over .SslCertificate if both specified. |
11873 |
SslCertificateLocation |
Path to client's public key file (PEM) used for authentication. Note: The path specified in this property is related to the system where Connector is running. Note: Either .SslCertificateLocation or .SslCertificate should be specified; .SslCertificateLocation property will be prioritized over .SslCertificate if both specified. |
6659 |
SslCertificatePem |
Client's public key string (PEM format) used for authentication. |
6660 |
SslCipherSuites |
A cipher suite is a named combination of authentication, encryption, MAC and key exchange algorithm used to negotiate the security settings for a network connection using TLS or SSL network protocol. |
6652 |
SslCrl |
Certificate Revocation List (CLR certificate) for verifying broker's certificate validity. Note: Either .SslCrlLocation or .SslCrl should be specified; .SslCrlLocation property will be prioritized over .SslCrl if both specified. |
11871 |
SslCrlLocation |
Path to Certificate Revocation List (CLR certificate) file for verifying broker's certificate validity. Note: The path specified in this property is related to the system where Connector is running. Note: Either .SslCrlLocation or .SslCrl should be specified; .SslCrlLocation property will be prioritized over .SslCrl if both specified. |
6663 |
SslCurvesList |
The supported-curves extension in the TLS ClientHello message specifies the curves the client is willing to have the server use. |
6653 |
SslKey |
Client's private key (PEM) used for authentication. Either .SslKeyLocation or .SslKey should be specified; .SslKeyLocation property will be prioritized over .SslKey if both specified. |
11872 |
SslKeyLocation |
Path to client's private key file (PEM) used for authentication. Note: The path specified in this property is related to the system where Connector is running. Note: Either .SslKeyLocation or .SslKey should be specified; .SslKeyLocation property will be prioritized over .SslKey if both specified. |
6655 |
SslKeyPassword |
Private key passphrase. |
6656 |
SslKeyPem |
Client's private key string (PEM format) used for authentication. |
6657 |
SslKeystore |
Client's keystore (PKCS#12) used for authentication. Note: Either .SslKeystoreLocation or .SslKeystoreLocation should be specified; .SslKeystoreLocation property will be prioritized over .SslKeystore if both specified. |
11874 |
SslKeystoreLocation |
Path to client's keystore file (PKCS#12) used for authentication. Note: The path specified in this property is related to the system where Connector is running. Note: Either .SslKeystoreLocation or .SslKeystoreLocation should be specified; .SslKeystoreLocation property will be prioritized over .SslKeystore if both specified. |
6664 |
SslKeystorePassword |
Client's keystore (PKCS#12) password. |
6665 |
SslParameters |
SSL configuraional parameters. |
6651 |
SslSignalsList |
The client uses the TLS ClientHello signature_algorithms extension to indicate to the server which signature/hash algorithm pairs may be used in digital signatures. |
6654 |
SslTlsSupport |
Configure the MQTT client for certificate based SSL/TLS support. |
6557 |
StagingComputer |
The name of the staging computer of asset effectiveness. |
2990 |
StagingTarget |
Selection of one or more staging targets. |
3075 |
StandardAllocationSize |
The block size for the runtime image allocations. |
47 |
Starttime |
Defines the start time for the export, if empty the oldest timestamp of the configured objects will be used. |
4118 |
StartupScript |
Property compound to setup the object's startup script. |
11863 |
StartupScriptScratch |
Scratch output container, which is accessiblee during execution of the startup script. |
11864 |
StartupScriptState |
State of execution for the startup script. |
11866 |
StartupScriptTimeout |
Timeout in seconds, used for determining the script's execution state. |
11865 |
StateData |
Used to hand over state information of the Web API to the Moonraker Web API Server Lua script. |
2851 |
StateManagement |
Maintains the state of the SchedulerItem. |
2798 |
StateTable |
This table holds the internal state information on a per tag basis. |
2791 |
Statistics |
The object will output statistics in form of a historizing variable tree. |
4164 |
Status |
This table holds the entire current status for this object. |
4152 |
StorageStrategy |
Summarizes the settings for historization, aggregration and forecasting for a particular ItemValue. |
154 |
StoreName |
Directs the resulting events to a particular file store. |
6499 |
StringFunction |
Select the string function. |
375 |
StructuredFileParameter |
Parameter to save history data in structured files. |
4104 |
SubscriptionDelay |
The A&E subscription delay value. |
1803 |
SubscriptionDelayOptions |
Property compound to define the options and monitoring for delayed A&E subscriptions. |
1801 |
SuppressIncompleteMergesets |
Ensures that the Asset Effectiveness Mergeset contains complete information. In case, the Unit Asset Code, the BatchID or the Timestamp portion is missing in the System Unique BatchID, the Mergeset will not be transmitted. |
11805 |
SuppressSnapshotIP21 |
Suppresses the last value in timeseries fetched near-time. |
5188 |
SuppressSnapshotPI |
Suppresses the last value in timeseries fetched near-time. |
5187 |
SupressAuditWrite |
Supress OPC write audits. |
1054 |
Swagger |
Indicates whether the Web API Swagger help page is available for everyone, login is required or disabled. |
3053 |
SystemAlias |
The system alias is an additional name for an object, which can be used as a shortcut for identification and has to be unique in the system. |
518 |
SystemDescription |
Generic description of the logical system. |
220 |
SystemID |
Hidden system identifier (currently only used for IOProperty). |
590 |
SystemType |
Determines the system type. |
2913 |
TableData |
Handles an entire table organized in columns and rows. The data can easily (cut, copy and paste) be exchanged with table-oriented data of other software products, e.g. MS Excel. |
2032 |
TableInfoColumnDisplayName |
Overwrite the name of the table information. |
1870 |
TableNamePrefix |
The prefix of the table name helps to create unique table names. |
2428 |
TagConfiguration |
Optional tag configuration that can be used by lookups in data processing script. |
6512 |
TagHeaderOptions |
Header Options. |
3014 |
TagName |
The external identifier to read the value from the interface. |
3017 |
TagNameParameter |
Compound for tag name parameters. |
3026 |
TagObjectPath |
The inmation object which will deliver the value. |
3020 |
TagObjectPathParameter |
Compound for object path parameters. |
3027 |
TagSelectionField |
Optionally enter a batch characteristic field name which works as a selector for the tag. This can be used to read from different tags in cases there are multiple products with multiple quantity tags or the like. |
11801 |
TagSelectionValue |
In case the Selection Field is set, this value must be set to one of the possible contents of the batch characteristic given in the selection. |
11802 |
TagUnitOptions |
Compound for tag unit options. |
3015 |
TagsCompleted |
The number of tags which completed the history fetch. |
2858 |
TagsTotal |
The total number of configured tags. |
2856 |
TagsWithData |
Shows the count of tags which delivered historical data during the most recent run. |
2803 |
TagsWithError |
The number of tags which had errors in the recent run. |
2857 |
TagsWithoutData |
Shows the count of tags which did not deliver any historical data during the most recent run. |
2804 |
TargetDatatype |
The data type to apply to values of this column. |
1950 |
TargetDropzone |
The Dropzone object where the file will be processed. |
6489 |
TargetID |
This unique identifier in the target historian will be used in case the item is part of a history sink function with an external historian. |
4100 |
TargetModel |
The target model of the file. |
6496 |
TargetObject |
The target object must have a raw data table and the operation mode must be set to 'Dropzone' to process the data. This option currently works only for the processing type 'Custom Script'. |
2942 |
TargetScript |
The script which will be performed on the file. |
6490 |
TargetTable |
The target table of the file. |
6497 |
TargetTableName |
The fully qualified target table to insert the main product asset effectiveness record for production. |
3067 |
TargetTableProperty |
Defines the target table property in the selected target object which will receive the data. |
2950 |
TeamConfiguration |
Configuration of the team responsibilites. |
2855 |
TestArchiveRetentionDays |
This value defines for how many days data will be kept in the Test Archive, before it gets finally deleted . |
414 |
TestDate |
The date of the material test. |
827 |
TestExpiration |
The date of the expiration of the test results. |
832 |
TestResult |
The value or list of values returned from the performance of the material test. For example: Pass, Fail, 95, Red, Green. |
828 |
TestSpecificationVersion |
An identification of the version of the Material Test Specification i.e. 1.0, A.1. |
826 |
TextMeaning |
Description of the hierarchical element's type. |
269 |
TextualCode |
The Asset Code for this hierarchical element. |
268 |
TextualDesignation |
The textual asset code of the particular hierarchy element. |
270 |
TextualDtFunction |
Select the textual date and time function to supply the string values for the object. |
427 |
ThemeDark |
Dark theme. |
12009 |
ThemeLight |
Light theme. |
12010 |
Throttling |
Throttles execution by yielding a second fraction of CPU time after each tag data transfer. Use with care, because the throttle time will multiply with the number of tags being configured in the particular transporter object. |
5200 |
TimeSeriesAllocSize |
A value used internally by the time-series buffer. This should only be changed when advised by Product Support. |
1127 |
TimeSeriesAutoShard |
Database and collection are sharded automatically when running against a sharded cluster. |
1140 |
TimeSeriesBufferMax |
The maximum size of the time-series buffer, in data values. |
1126 |
TimeSeriesBufferMin |
The minimum size of the time-series buffer, in data values, eligible for immediate writing. |
1125 |
TimeSeriesCollection |
The collection storing time-series data. |
1137 |
TimeSeriesDatabase |
The database storing time-series data. |
1135 |
TimeSeriesDatabaseTest |
The database storing time-series data. |
1136 |
TimeSeriesErrorLatencyMinutes |
The time during which successive errors are not reported. |
1162 |
TimeSeriesLatency |
The maximum duration to buffer time-series data in memory. |
1124 |
TimeSeriesMaxFuture |
Data with timestamps beyond the specified offset from the current time will be rejected. Data with significant future offsets degrade the purge performance of the test store, potentially causing it to keep data longer than the configured retention time. |
2167 |
TimeSeriesPurgeDelay |
A delay between successive purge batches. |
1132 |
TimeSeriesPurgeMax |
The maximum number of BSON documents purged in a single batch operation. |
1133 |
TimeSeriesPurgeOptions |
Controls what happens to an object's data in the store after the object's deletion. |
1915 |
TimeSeriesPurgeWhenIdle |
Inhibits purging when time-series data are being persisted. |
1134 |
TimeSeriesRetention |
The maximum age of data in the test archive. |
1130 |
TimeSeriesRetryPeriodSeconds |
The time after which an unsuccessful operation shall be retried. |
1161 |
TimeSeriesStore |
The database storing time-series data. |
1138 |
TimeSeriesStoreTest |
The database storing time-series data intended for testing. |
1139 |
TimeSeriesThreads |
The number of threads used when writing time-series data. |
1128 |
TimeSeriesUsePrimary |
Use the connection settings configured at the higher level. |
1142 |
TimeSettingsEditor |
Provide settings for this time window with start, end and interval. |
2136 |
TimeShift |
The Timeshift value will be added to the end time when near-time historical queries are to be performed in Continous mode. This allows to have an offset in the end time which may be useful to suppress unwanted snapshot data or balance out some time management differences when multiple computers are involved which are not entirely time-synchronous. Negative Timeshift values will move the query end time backward (towards history), positive values forward (into the future). |
5309 |
TimeSlice |
The period in which running batches are updated. The remaining time will be used for backward and forward operations. |
3054 |
TimeSliceUsage |
The percentage of time of the configured Time Slice value, which is used for processing active batches. In case the value is close to the maximum of 100% a larger value for Time Slice should be considered. |
3055 |
TimeoutCommunication |
Value in seconds for the communication timeout. After this time the communication to the remote component is considered to be unavailable and the connection will be terminated. Re-connection will be attempted periodically. |
592 |
TimeoutMillis |
Value used for timeouts in milliseconds. |
351 |
Timestamp |
The timestamp of the start time of the oldest BatchID. |
3059 |
TimestampCustom |
A string format mask specifying the interpretation of the timestamp. For Example "%d.%m.%Y %H:%M" for "01.12.2016 17:00" (q.v. http://www.boost.org/doc/libs/1_41_0/doc/html/date_time/date_time_io.html). In case you use ISO8601-compliant timestamps, this format does not need to be specified. |
2985 |
TimestampCustomOptions |
Compound for timestamp format 'custom' parameters. |
2986 |
TimestampCustomScript |
The custom script, which is required to return the timestamp in numerical POSIX millisecond format. |
5239 |
TimestampCustomScriptOptions |
Compound for timestamp 'custom script' parameter. |
5240 |
TimestampFormatSelection |
Defines how to interpret the timestamp. |
2984 |
TimestampLocal |
If this is checked it is assumed that the datasource provides timestamps as local time, if unchecked UTC timestamps are assumed. |
2983 |
TimestampOptions |
Compound for timestamp parameters. |
2982 |
Timestamp_Current |
The current time of the OPC server. |
549 |
Timestamp_RecentUpdate |
The time the server sent the last data value update to this client. This value is maintained on an instance basis. |
550 |
Timestamp_Start |
The time the OPC server was started. This is constant for the server instance and is not reset when the server changes states. |
546 |
TimezoneOverride |
Numerical value in minutes used to adjust all timestamps from a particular data source (can be negative if east of Greenwich or positive for locations west of Greenwich). |
1805 |
TopRows |
The number of rows which will be inserted into the diagnostic table. Please note that any value above zero will result in two queries being executed and thus adding significant load to the object function and the database server. |
6446 |
TopicBlacklist |
Topic blacklist, a comma-separated list of regular expressions for matching topic names that should be ignored in broker metadata information as if the topics did not exist. |
6616 |
TopicConfigurationProperties |
Kafka Producer's topic configuration properties. |
6695 |
TopicMetadataRefreshFastIntervalMs |
When a topic loses its leader a new metadata request will be enqueued with this initial interval, exponentially increasing until the topic metadata has been refreshed. This is used to recover quickly from transitioning leader brokers. |
6613 |
TopicMetadataRefreshIntervalMs |
Topic metadata refresh interval in milliseconds. The metadata is automatically refreshed on error and connect. Use -1 to disable the intervalled refresh. |
6611 |
TopicMetadataRefreshSparse |
Sparse metadata requests (consumes less network bandwidth). |
6615 |
TotalItems |
Limits the total number of items browsed. |
5335 |
TotalNodes |
Limits the total number of nodes browsed. |
5336 |
TrackingAssignment |
The type of tracking information, which is to be extracted from this column. |
1443 |
TrackingColumnIdent |
Either column number or a tag name, which is used to identify the column to be used for extraction of tracking data. |
1442 |
TrackingInvalidReplacement |
A numeric value which will be used to replace a value which violates the range definition. |
1448 |
TrackingOptions |
An extensible set of properties which allows for the extraction of production tracking information from column based data. |
1447 |
TrackingValidLowerRange |
Values are considered to be valid if they are above or equal the lower range. |
1446 |
TrackingValidUpperRange |
Values are considered to be valid if they are below or equal the upper range. |
1444 |
TransferContext |
When switched on, the context transmission (description, limits, engineering unit) from the source tag is executed. |
5310 |
TransferProcessing |
Compound for smart messages configuration. |
12107 |
TransferTable |
Table with tagnames and their target-paths. |
2376 |
TransmissionLimitSafAuditTrail |
Size limit for Store and Forward Audit Trail entry transmissions per network round-trip. |
6532 |
TransmissionLimitSafEvent |
Size limit for Store and Forward Event transmissions per network round-trip. |
1201 |
TransmissionLimitSafLog |
Size limit for Store and Forward Log entry transmissions per network round-trip. |
1200 |
TransmissionLimitSafVqt |
Size limit for Store and Forward VQT data transmissions per network round-trip. |
1043 |
TransmissionLimitTotal |
Total size limit for real-time data transmissions per network round-trip. |
1203 |
TransmissionLimitVqt |
Size limit for real-time VQT data transmissions per network round-trip. |
1205 |
TransmissionLimits |
Limits for real-time data transmissions. |
1002 |
TransporterConfiguration |
Configuration of auto-created HistoryTransporter objects for each data source. |
3083 |
TransporterMode |
The processing mode of the history transporter object. |
4147 |
TransporterObjectName |
The object name of the history transporter. |
4065 |
TrendDisplayOrder |
The display order of the trend pen. |
1944 |
TrendInfoDisplayName |
Overwrite the name of the trend information. |
1868 |
TrendObjects |
Assignable list of objects which define the trend context for this event. |
1888 |
TrendRangeEnd |
End time of the trend as string, i.e. "*" (*= now). |
1108 |
TrendRangeName |
The name of the VKPI trend range. |
1102 |
TrendRangeStart |
Start time as string, i.e. *-1hour, *-4hour, *-1day, *-7day, *-30day, *-60day. |
1106 |
TrendRanges |
Trend ranges configuration. |
1103 |
TrendRangesDefault |
Start and end time of "Default trend range" (1 record only, name fixed, start & end configurable). |
1109 |
TrendYAxis |
Trend y-axis. |
2181 |
TurnaroundTime |
The time which was required for the most recent query execution. |
6448 |
UOM |
Selection of the Unit of Measurement. Scroll on top of the list and select the 3rd entry of the list if you want to use the value you entered in the property Custom UOM instead of a list entry. |
4092 |
UaConnectionMode |
Use endpoint or discovery. |
702 |
Unit |
Allows to define the unit name the data belongs to. |
4122 |
UnitAssetCode |
If the unit asset code is configured the batch data for this unit will be transferred to Asset Effectiveness. |
2970 |
UnitDescription |
The human readable description for this unit. |
2971 |
UnitEvents |
Select the distinct events this unit shall raise depending on state changes in the underlaying batch record. |
6564 |
UnitOptions |
Array for batch unit configuration. |
2973 |
Uri |
A uniform resource identifier (URI) is a string of characters used to identify a name of a resource. Such identification enables interaction with representations of the resource over a network, typically the World Wide Web, using specific protocols. |
28 |
Url |
The URL which lets the datasource object connect to the web service. |
601 |
UseOfflineDocumentation |
Use offline documentation. |
6440 |
UseSubscriptionDelay |
Switches the subscription delay on and off. |
1802 |
UserCommentMandatory |
If enabled, every change(s) to the object properties must be accompanied with valid a comment. |
11856 |
UserName |
User Name. |
25 |
UtdValues |
Shows the absolute number of up-to-date data transfers in the current cycle. |
5317 |
VQTFieldNameValue |
The script will be applied to each value returned from the SQL query, to enable further value formatting or type processing. |
2894 |
VQTFieldnameQuality |
The script will be applied to each quality returned from the SQL query, to enable correct quality processing. The quality returned from the script needs to be a valid UaStatus, according to inmation.model.codes.UaStatus. |
2895 |
VQTFieldnameTag |
The SQL query which delivers the context for the configured tags. The query result can have the following field names, which will be translated to inmation properties if they exist: DESC (Description), EU (Engineering Units), RLO (Low EU range), RHI (High EU range), LLO (Low alarm limit) and LHI (High alarm limit). |
2899 |
VQTFieldnameTime |
The script will be applied to each timestamp returned from the SQL query, to enable correct timestamp processing. The timestamp returned from the script needs to be a valid posix timestamp. |
2897 |
VQTGenericSQLConnection |
Compound for generic SQL and ODBC connection parameters. |
2900 |
VQTSQLBuilder |
Compound for the generic SQL parameters. |
2901 |
VQTSQLQuery |
The SQL query which delivers the value (V), quality (Q) and time (T ) of an object. The tokens __START__, __END__ and __EXTERNALID__ will be replaced at runtime. The query result has 3 mandatory field names: V,Q and T. |
2893 |
VQTTablename |
The name of the table or view which delivers value (V), quality (Q) and time (T ). This value will replace the [table or view] parameter in the SQL query. |
2898 |
Value |
The nominal or standard value of a material class property. |
745 |
Vendor |
Vendor specific string providing additional information about the server, i.e. the name of the company and the type of device(s) supported. |
557 |
VendorCode |
The code for this event item which has been assigned by the vendor of the OPCServer. |
647 |
VendorText |
The text for this event item which has been assigned by the vendor of the OPCServer. |
648 |
Version |
The version of the OPC Server Software. |
556 |
VisualKPIObject |
The corresponding Visual KPI object class. |
1955 |
WarningOnly |
If this option is set the severity level of the alert is downgraded from 'Error' to 'Warning'. |
573 |
WasteProducts |
Allows to reclassify regular products to waste product. |
6571 |
WebAPIAddress |
Adress (without port number) of the Web API server (i.e. http://localhost). |
12048 |
WebAPIAuthentication |
Compound that controls the authentication data for the Web API Server. |
2865 |
WebAPICommunication |
A property compound for the Web API communication. |
2854 |
WebAPIStaticContent |
Static content. |
5214 |
WebAPIWebSocket |
Compound that controls the WebSocket information. |
2866 |
WebSocketMaxMessageSize |
The maximum message size for incoming requests. |
2834 |
Whitelist |
List of entry points that will be used for LDAP search. |
361 |
XAxisPath |
Path to an X-Axis object. |
12020 |
XAxisPaths |
List of Advanced Trend X-Axis objects. |
12015 |
YAxisPath |
Path to an Y-Axis object. |
12021 |
YAxisPaths |
List of Advanced Trend Y-Axis objects. |
12016 |
Zoomlevel |
Specific to groups (0-21) default Google zooming level. |
1857 |
inmationComponent |
This structure contains the data and settings, which identify the component within a larger system and define its specific functional behaviour. |
444 |
inmationComponentCode |
The internal type of a component (=service). |
441 |
inmationComponentGuid |
The internal GUID of a component. |
1711 |
inmationComponentID |
The internal ID number of a component (=service on a particular hardware), which must be system-wide unique. |
440 |
inmationComponentRole |
The system role of the component (such as a Master role). |
442 |
inmationComponentSecondaryRole |
The secondary role code for the component. |
443 |
inmationDaServerClassDescription |
Descriptive Text for this instance of the Virtual OPC DA Server. |
324 |
inmationDaServerClassID |
The Virtual Class ID for the distinct instance of the Virtual OPC Server. The system will generate a new Class ID whenever the name of the Server Instance is changed in order to let OPC Clients distinguish between multiple instances on one Host Computer. |
328 |
inmationDaServerClassName |
Change this name only in case you intend to run multiple logical OPC DA Servers on a distinct Host Computer. |
323 |
inmationDaServerClassVersion |
The Class Version should be one under regular conditions. There is no real reason to change it . |
325 |
inmationInstance |
The inmation instance. |
2400 |
inmationServerApplicationDescription |
The descriptive text for a certain instance of the Virtual OPC DA Server. |
319 |
inmationServerApplicationID |
The Application ID (GUID), which will automatically change whenever a unique combination of Vendor Name and ApplicationName is created. |
322 |
inmationServerApplicationName |
The Application Name for a particular Virtual OPC DA Server. You should only change it in order to run multiple instances on the same Host Computer. |
317 |
inmationVendorName |
The vendor name for system:inmation Virtual Interface Servers. You should only change it having good reason to do so. |
315 |